WOODEN PLAYHOUSE 2203 INSTALLATION AND OPERATING INSTRUCTIONS Unassembled parts may be a choking hazard to children 3 years and younger. The plastic bags that contain the hardware may present a choking hazard to small children. Please keep these bags and all plastic bags out of the reach of children. Do not allow children to play with them and dispose of them immediately when empty. CAUTION: Adult Assembly Required Hardware contains small pieces with sharp points.
Web: www.funphix.com E-Mail: support@funphix.com Installation and Operating Instructions ⚠ GENERAL WARNING To reduce the risk of serious injury you should before you begin, read this document and assembly instructions carefully, make sure that no parts are damaged or missing. Remove all parts from the packaging and spread them out on a clean work surface. Assemble all parts according to the instructions in this manual and do not skip any step.
⚠ Important Warnings and Safe Play Instructions Read, Follow and Enforce All Product, Package Warnings, and Instructions. Use only under competent supervision, never leave children unattended while the Playhouse is in use. To avoid danger of suffocation, keep the anchor bags and all packaging away from babies and children. Only use in open areas that is level and clear of sharp objects, stones and branches that could injure the user when playing or damage the Playhouse.
Instructions for Proper Maintenance Keeping your playhouse in good condition is essential to reduce injuries. Save this document and assembly instructions so you can order parts that break or wear out. Inspect your playhouse at regular intervals to make sure that assembly integrity has been maintained. The following maintenance schedule is recommended: Hardware Inspect all nuts and bolts and tighten if required. Hardware should be firmly against, but not crushing the wood.
Maintenance to be carried out under the direct supervision of a responsible adult. Colour, designs and decorations may vary from those shown in the photographs.
threads. If a thread protrudes from the T-Nut, undo the entire bolt, and add washers to eliminate the risk of a protrusion hazard. Proper Hardware Assembly As a general rule of thumb, your pilot hole should be slightly smaller than the diameter of your screw. This will remove as much material as possible, which will reduce the likelihood of splitting, but will still leave enough material for the screw's threads to grip into. Once the pilot hole is drilled, you can install the screw.
66.65 inch 44.88 inch 80 inch 61.67 inch 44.88 inch 80 inch 66.
2203001 X4 2203013 X2 2203002 X4 2203014 X12 2203003 X3 2203015 X4 2203004 X4 2203005 X4 2203006 X2 2203007 X2 2203008 X4 2203009 X2 2203010 X2 2203011 X4 2203017 X4 2203018 X2 2203019 X2 2203020 X6 2203012 X4 XLW2 XFW2 XTN2 XLW1 XFW1 XTN1 XH1 XH3 XH11 XS5 XG4 XG13 XG21 2203016 X3 65 65 65 79 79 79 39 12 39 10 55 9 12 2203021 X6 Canopy
2203003 XG21 With XLW2/XFW2/XTN2 2203006 2203002 1 Parts 2203002 2203003 2203006 XG21 XLW2 XFW2 XTN2 Qty 4 3 2 12 12 12 12
2203001 XG4 With XLW2/XFW2/XTN2 2 Parts 2203001 XG4 XLW2 XFW2 XTN2 Qty 4 8 8 8 8
2203009 XG13 With XLW2/ XFW2/XTN2 2203008 2203007 3 Parts 2203007 2203008 2203009 XG13 XLW2 XFW2 XTN2 Qty 2 4 2 8 8 8 8
XG4 With XLW2/XFW2/XTN2 2203011 4 Parts 2203011 XG4 XLW2 XFW2 XTN2 Qty 4 8 8 8 8
XG4 With XLW2/XFW2/XTN2 2203012 Note that the Sink hole of 2203012 is facing down 5 Parts 2203012 XG4 XLW2 XFW2 XTN2 Qty 4 8 8 8 8
2203010 2203005 2203004 XG4 With XLW2/XFW2/XTN2 Notice that the hole is closer to the 2203001 2203001 6 Parts 2203004 2203005 2203010 XG4 XLW2 XFW2 XTN2 Qty 4 4 2 18 18 18 18
2203020 XH3 With XLW1/XFW1/XTN1 7 Parts 2203020 XH3 XLW1 XFW1 XTN1 Qty 6 12 12 12 12
2203021 XH11 With XLW1/XFW1/XTN1 8 Parts 2203021 XH11 XLW1 XFW1 XTN1 Qty 6 12 12 12 12
2203015 2203014 2203013 is only arranged without locking bolts 2203016 2203017 XH1 With XLW1/XFW1/XTN1 9 Parts 2203013 2203014 2203015 2203016 2203017 XH1 XLW1 XFW1 XTN1 Qty 1 2 2 1 2 10 10 10 10
2203015 2203014 2203013 is only arranged without locking bolts 2203016 2203017 XH1 With XLW1/XFW1/XTN1 10 Parts 2203013 2203014 2203015 2203016 2203017 XH1 XLW1 XFW1 XTN1 Qty 1 2 2 1 2 10 10 10 10
2203019 2203016 2203014 XH1 With XLW1/XFW1/XTN1 11 Parts 2203014 2203016 2203019 XH1 XLW1 XFW1 XTN1 Qty 8 1 2 18 18 18 18
2203018 XH11 With XLW1/XFW1/XTN1 12 Parts 2203018 XH11 XLW1 XFW1 XTN1 Qty 2 8 8 8 8
2203020 Velcro 13 Parts Canopy Qty 1
