Before you begin to use this toy, you must read all the information in this manual. Warning: Do not sit, stand, or climb or play on your structure until all screws are secured into their place. A screw must be inserted into the tube hole that aligns with the connector for the toy to be safe and secure.The screws must be inserted on both ends of each tube.The toy will fall apart without the screws in place.
Supervision and playing 1. An adult must always be present to watch over the children when they are building, playing or using the structures. Parents are liable for the children’s actions. Children Play on the play structures at their and their parent’s own risk Do not misuse the play structures, use it for the purpose it was intended. The maximum weight on the structures is a total of 150Lbs.
This package has small parts that can be swallowed! Not for children under 3 years.There is danger of choking and/or suffocation! Parts list 5 way connector 4 way connector Colored Panel Qty X10 Qty X24 (15.55 Inches X bullfinches) Qty way connector T connector Tubes (13.58 Inches) Qty X14 Qty X8 Qty X103 » Elbow connector || 2 way connector Screws Panel screw Key Qty X20 Qty X4 Qty X232 Qty X20 Qty X2 o Iflb : Diagonal Tube (5.
Instructions on How to assemble structures -The screws are secured as well as removed by insertion of tube over connector followed by a screw through both tube and connector's aligned holes, followed by a 90 degree turn. To detach the tube from the connector, first remove the screw by turning it back 90* then turn the tube slightly and remove it from the connector. will be simpler to build a structure from the base up, complete the first level and then continue on to the next level just above .
Remember when inserting the screws for the tube and connector where you want to insert panels as those places will be secured by the required panel screws. Each tube only has 2 screw holes and therefore you will have to ensure that the panels are put extending in different directions when sharing the same tubes. So that you can insert the necessary panel screws in each panel hole and tube .See image below.
Instructions how to use the Duplex connector -When assembling a slide or a slanted structure with more than 2 panels, make sure to add tubes to the bottom of the slide aiming towards the surface below, so that the structure gets additional support. See image below See images how touche the duplex connector It is our ultimate goal to serve our happy customers. Funafuti provides 5 Year warranty on Funafuti parts when used indoors.
To explore all our additional items and for more information check out our website www.funphix.
