Operation Manual

ipconfig –ifN-function N is 0, 1, 2
Itno Command Description
1 ? Show ‘ipconfig -ifN’ Option
2 -t Set Host Type
3 -m Set MAC Address
4 -i Set IP Address
5 -nm Set Net Mask
6 -g Set Gateway
7 -dns0 Set Primary DNS server
8 -dns1 Set Secondary DNS server
9 -dr Set Default Route
10 -nat Set NAT
11 on Enable Interface
12 off Disable Interface
13 -dhcps DHCP Server Setting
14 -ddns Set DDNS
15 -bridge Set Bridge
16 -dev0 Set Device 0 Setting
17 -dev1 Set Device 1 Setting
18 -dev2 Set Device 2 Setting
19 (null) Show Interface Setting
save function
Itno Command Description
1 ? Show ‘save’ Option
2 -book Save phone book
3 -sys Save system setting
reboot function
Rebootingthe telephone.
exit function
Terminatingentry through CLI.
debugmode
Launchingthe debug mode.
Configuring the phone via Telnet (only under Windows XP)
61