Operation Manual

LAN Settings
If you wish to set up the phone’s integrated NAT on this page, you must deactivate Bridge mode beforehand.
LAN Settings
•
The «LAN Settings« page lets you set up address translation for the network. Also featured onthis page are options
for setting the local IP address (IP), the subnet mask (Mask), and the MAC address (MAC).
DHCP Server
•
These options enable (On) and disable (Off) the DHCP Server.
•
Settings under »LAN Settings« are »Start IP«, »End IP«, the lifetime in days and hours of a dynamic IP address allo-
cated by the DHCP server (»Lease Time«), as well as the activation status of the DHCP servers.
Appointment reminder calls (Alarm setting)
43