Operation Manual

Replace rule 2:

The digit sequences 002, 003, 004, 005, 007 and 009 are replaced by the digit string 006. In the example shown here, the number

»006+xxxxx…« is dialed.

Replace rule 3:

If 12 is input as the first digit string, the digit string »009« will be placed in front of it for dialing. The number that will then be dialed is

»009+12+xxxxx…«.

Replace rule 4:

•

After inputting the digit 5 and three other digits, 007 will be placed in front of the number. In the example shown

here, the number »007+5xxx« is then dialed.

•

After inputting the digit 5 and four other digits,007 is not placed in front of the number. In the example shown here,

the number »5xxxx« is then dialed.

•

After inputting the digit string 35 (or 21) and two other digits, 007 is placed in front of the number. In the example

shown here, the number »007+35xx« (or »007+21xx«) is then dialed.

Call waiting setting

Where required, the Call waiting function can be de-activated so that no further incoming call is signaled.

Softkey Setting

You can also configure corresponding keys for »Pick-up« and »Voice Mail«. These keys must be present on the phone before the function

can work properly however.

•

Pick up key: Enter the key that is to be used for accepting incoming calls.

•

Voice mail key: Enter the key for Voice Mail.

Call waiting setting