Operation Manual

<>
O
Select »2.Subnet mask«.
Confirm your entry using the »OK« button.
1.IP Adress
2.Subnet mask
t
O
Enter the subnet address of your network (in this example
255.255.255.0)
Confirm your entry using the »OK« button.
Subnet mask:
255.255.255.000
<>
O
Select »3.Defaul Gateway«.
Confirm your entry using the »OK« button.
2.Subnet mask
3.Defaul Gateway
t
O
Enter the gateway address of your network (in this example:
255.255.255.0)
Confirm your entry using the »OK« button.
Gateway IP:
192.168.001.250
DSL- or cable modem access (PPPoE)
Begin as follows:
a
M <> O <> O
»Menu« button
4.Network 1.WAN Setup
<>
O
Select 3.PPPoE«.
Confirm your entry using the »OK« button.
2.Fixed IP setti
3.PPPoE setting
t
O
Under »1.User Name « and »2.Password« enter the user name
and password assigned to you by your provider.
Confirm your entry using the »OK« button.
1.User Name
2.Password
If the user name or password contains special characters that are not supported by the phone, these entries must be
made using the »Web Configurator«.
LAN Settings
•
If the LAN setting is at «Bridge«, the two Ethernet ports are linked transparently with one another. You need this op
-
tion if the phone is interconnected with an external NAT router.
•
If the LAN setting is at »NAT«, the integrated NAT is activated. This setting is useful for ADSL users who don’t have
access to a NAT router.
Begin as follows:
a
M <> O <> O
»Menu« button
4.Network 2.LAN Setup
<>
O
Select 1.Bridge « or »2.NAT«.
Confirm your entry using the »OK« button.
1.Bridge
2*NAT
Configuration using the telephone
26