Operation Manual

Begin as follows:
a
M <> O <> O
Menu button
3.Phone setting 5.Volume & Gain
<>
O
Select »4.Speaker gain«.
Confirm your entry using the »OK« button.
3.Handset gain
4.speaker gain
<>
O
15 levels (steps) are provided for the amplification setting. Se
-
lect the desired value.
Confirm your entry using the »OK« button>«.
Speaker gain:
8 (15=Max)
Ringer setting
Use this setting to define the ringing melody you wish to use and its volume.
Begin as follows:
a
M <> O <> O
»Menu« button
3.Phone setting 6.Ringer
Ringer volume
<>
O
Select »1.Ringer volume«.
Confirm your entry using the »OK« button.
1.Ringer volume
2.Ringer type
<>
O
You can set the volume in 10 steps. Select the desired value.
Confirm your entry using the »OK« button.
Ringer volume:
6 (10=Max)
Tone setting
<>
O
Select »1.Ringer type«.
Confirm your entry using the »OK« button.
1.Ringer volume
2.Ringer type
<>
O
You can set 4 different ringing melodies. Select the desired
melody.
Confirm your entry using the »OK« button.
Ringer type:
3 (4=Max)
Auto Dial Time
If you enter digits for composing a subscriber number, the phone must have some means of recognizing when dialing ends. During manual
dialing, you mark out the end of a dialed number by pressing the number (#) key. If the number key (#) is not pressed after dialing a phone
number, dialing will assume to be completed only when the defined time period starting after which the last number was entered expires
(»Auto dial«) You can adjust the length of that period of time between 3 and 9.
Begin as follows:
a
M <> O <> O
»Menu« button
3.Phone setting 7.Auto dial
Configuration using the telephone
24