Operation Manual

<>
O
Select either »1.Allways« for permanent Idle, or »2.By Period» to
define a time period in which no acoustic signals will be issued
at your phone.
Confirm your entry using the »OK« button.
1.Allways
2.By Period
<>
O
If you have selected »3.By Period«, under »4.Period Time« you
can set the time at which no acoustic signal is to be issued by
your phone.
Confirm your entry using the »OK« button.
2.By Period
3.Period Time
t
O
Here, enter the time period in which station guarding is to be
activated at your phone (in the example shown here from
12:30 to 13:00).
Confirm your entry using the »OK« button.
1.Period Time:
12:30 13:00
Appointment reminder calls (Alarm setting)
Your phone can also activate an appointment reminder call at a time which you can define.
Begin as follows:
a
M <> O <> O
»Menu« button
3.Phone setting 3.Alarm setting
To enter the time, move the arrow (cursor) to the proper position and input the correct digits.
O<>
Select »1.Activation«.
Confirm your entry using the »OK« button>«.
1.Activation
2.Alarm time
<>
»1.Enabled«. This activates the appointment reminder call. 1*Enabled
2.Disabled
<>
O
»2.Disabled«. This de-activates the appointment reminder call.
Confirm your entry using the »OK« button.
1.Enabled
2*Disabled
<>
O
Select »2.Alarm time«.
Confirm your entry using the »OK« button>«.
1.Activation
2.Alarm time
t
O
Here, enter the time at which the reminder call is to be placed
(in the example shown here, 12:30).
Confirm your entry using the »OK« button.
1.Alarm Time:
12:30
Setting the date / time
It is useful to configure a timerserver inyour phone so that your Telephone remains synchronized within thenetwork. This server can be in
-
stalled at an external location in the Internet as a so-called Public Time Server or in your own network. SNTP server access must be de-acti
-
vated for this. This setting must be made when you do not receive the time automatically via an SNTP server.
Configuration using the telephone
20