Operation Manual

Settings
Temporary handset volume setting (Volume)
The telephone is idle, or you wish to change the handset or speaker volume during an ongoing call.
<>
Use the arrow keys to adjust the handset or speaker volume.
The display shows volume control values from »Volume= 0« tos
»Volume= 15«.
12-01 08:26
Volume= 10
Viewing the IP address
c
IP
Press the »IP« function button. The display then shows the IP
address currently assigned to your phone.
12-01 08:26
192.168.001.053
Do not disturb Settings (DND)
c
DND
Press »DND« (Do not Disturb). The feature is active when
»DND« shows on the display.
12-01 08:26
# DND #
Activate call forwarding (FWD)
Use this key to activate call forwarding. Call forwarding must have been configured previously in the phone for this.
c
FWD
Press the function key »FWD«. Call forwarding is active when
»Empty FWD Number« shows on the display.
12-01 08:26
AF10
When you replace the handset, the following appears in the
display, for example »AF 10«. This indicates that you have con-
figured call forwarding to subscriber 10. When you replace the
handset after completing a call, the text in the display »#For-
ward#« notifies you of an existing call forwarding setting.
12-01 08:26
Empty FWD Number
#Forward#
Speed dial
You can save a speed dialing number at keys M1 to M3; the number is then dialed when you press one of these keys. These three keys assign
the locations »Phone 1« - »Phone 3« for the »Speed Dial Phone List« in the Web configuration for the phone. You can configure these three
locations either with Web configuration, or using the phone. You can overwrite this number using your phone.
Configuring speed dialing destinations for a function key
at The handset remains on hook.
Dial the number you wish to call.
IP Dialing..
1234567
c
M1
Press »M1«, »M2« or »M3«. In this example »M1«.
1234567
Save to M1 <ENT>
O
Press »OK« to save the entry.
Speed Dial M1 :
1234567
Settings
15