Operation Manual

Refer to the operating instructions for the device concerned, or for the operating system, for details on removing
drivers.
Information:
In some special circumstancesit may be necessary to also physically remove the ISDN card form your PC in additi
-
on to (virtually) removing the drivers.
Installing the programs from CD-ROM
Information:
At present, only Microsoft Windows operating systems are supported for connection of a PC to the telephone via
the USB port.
PC requirements:
·
IBM or 100% compatible PC
·
Pentium or comparable processor, min. 133 MHz clock rate
·
min. 32 MB RAM
·
CD ROM drive
·
Free USB-port
·
Windows 98SE / ME / 2000 / XP operating system
·
Min. 80 MB free hard disk space for installation
Installation sequence
·
Start up your PC.
·
Insert the CD ROM supplied with the system in the CD ROM drive of your PC.
·
Wait a moment until the program starts automatically. If the autostart option is not activated in
your PC you can start the file »setup. exe« directly from the maindirectory of the CD using Wind-
ows Explorer (double click on the file), or using the option »Run« in the Windows start menu.
·
The welcome screen for the CD is displayed after you start the file.
·
Install the programs and drivers in the order given:
CAPI driver
WIN-Tools programs
TAPI driver
CTI software (not included in the package)
CAPI software (not included in the package)
NDISWAN driver
·
Connect the telephone to the PC’s USB port as described on page 7. Thetelephone is automatical
-
ly detected by the PC.
Information:
Installation of a device driver is started automatically the first time you connectthe telephone to the PC. The device
driver is located in the root directory of the CD-ROM. Follow the instructions displayed on the monitor.
·
You can then use your phone together with the installed PC programs.
Telephone and PC Installing the programs from CD-ROM
80