Operation Manual

With the IP-S400 you can use the Professional Configurator (WIN-Tools for the pabx) under »System telephones«,
»Indirect software download« to trigger a manual firmware download. In the Professional Configurator you can
entertheInternetaddressforthefirmwaredownload.Forthis,nokeysneedtobepressedonthesystemtelephone.
Information:
For more information about firmware download, refer to the »Firmware Download IP« description on your CD.
·
Do not press any keys (unless prompted to do so) or plug in or unplug any connectors while data
transfer is in progress. If the connecting line is interrupted during a download, restart the
download program and proceed as described previously.
·
Once the new firmware has been loaded completely the telephone performs a RESET and is then
available for use again.
·
In some circumstancesall of the data in your phone maybe deleted after a firmware download. If
this is the case, a notice is given prior to starting the download. Prior to downloading, save all of
your telephone data (configuration, phone directory) to your PC.
Downloading new firmware using the telephone’s USB port
You can load the newest firmware versions into your telephone via the phone’s PC interface and using the
WIN-Tools CD ROM supplied with the system.
·
Connect the phone to the PC.
·
Load the new firmware into your PC (e. g. from the Internet).
·
Launch the download manager of the WIN-Tools.
·
In the field »Type of connection« select the »USB«port.
·
Go to »File«, »Open« and select the directory where the new firmware is stored.
·
In the field »Status« click »Start Download« to begin downloading the new firmware.
Downloading new firmware from the server PC
»Funkwerk Enterprise Communications GmbH« provides a server PC which can be used for loading new firmware
into your telephone. In this case, the firmware is downloaded through the ISDN connection. Download can take 12
minutes approximately, depending on the size of the firmware file. Please note that there is a charge for loading
firmware via an external ISDN connection.
You can use the Professional Configurator under »System telephones«, »Indirect software download« to trigger a
manual firmware download. For this, no keys need to be pressed on the system telephone.
Information:
Important notice for export variants:
Please ask your specialized dealer/distributor for the access number of the
download server for your country!
Download server Call number
Funkwerk server ++49-(0)5171-901190
Service
75