Operation Manual
You can have the version and the model of your phone displayed so that you can determine, for example, which
firmware version is available in your phone.
Begin as follows:
a
Mss
t
Os
Configura
-
tion
Service Telephone
PIN
Version
<>
C
The display shows information about your telephone.
FOR EXAMPLE.: Firmware version, name, … Press the arrow
key to display further information.
Press the C button to exit the menu.
Software-Identification
Type: xxxx V1.01
Time:08/01/07 13:41
Module:V1.00
:V4.311 16 00 0D 0D 0
Name: Desk 25
Data
Reset - Restauring the default telephone settings
You can reset the telephone to its initial state using the procedure described below. All of the data that you have
enteredpreviouslywill be deleted. Or,youcandeleteonlyuser-specificdatasuchas:telephone directory entries,VIP
destinations, SMS /UUS1 messages, data for the Answering machine module, the caller list and the redial list. Any
function keys configured for these features will not be deleted.
If you have the T400 key expansion module connected to your telephone, all data associated with the key expansion
module will be deleted when the procedures described below are executed.
Attention:Settingsfortheoptional answering machine and any texts that havebeenstoredwillnotbe deleted. Please
refer also to the instruction manual supplied with your answering machine.
Begin as follows:
a
Mss
t
Oss
Configu-
ration
Service
Telephone PIN
Data ok
s Press the softkey »ok« to reset the telephone to its initial state. If
youdonotwishtohavethedatadeletedpressthesoftkey»no«.
Sure to delete all?
OK, incl. AM
No
ok
User data only
When you press the correspondingsoftkey e.g.. »ok«the telepho
-
neisreset to thedefault configuration. Alldata is deleted, the tele
-
phone starts new. This could take several seconds to complete.
29.05.03 07:41 }
Info -i-
Tel. drctry
Quiet
VIP
Software
Downloading new firmware
»Funkwerk Enterprise Communications GmbH« provides a server PC which can be used for loading new firmware
into your CS410 and CS410-U system telephones. In this case, the firmware is downloaded through the ISDN
connection. Download can take 12 minutes approximately, depending on the size of the firmware file. Please note
that there is a charge for loading firmware via an external ISDN connection.
Service
74