Operation Manual

Name
Telephone name
You can assign a name (20 characters max. ) to the telephone to provide it with unique identification within a PABX
system. You will need the telephone name for example for configuring the telephone through the interal ISDN
connection of a connected pabx. The default name entered is the telephone’s serial number.
Begin as follows:
a
Ms s
t
s
Configuration Service
Telephone PIN
Name
t
O
Enter a name for the telephone (max. 20 characters) and confirm
your entry by pressing Ok.
Device name
Name> 0000000923
SMS
Number for the SMS center
Information:
Thesenumbers can be edited using »Extended Configuration«only. It is possible to display the numbers and chan-
ge the TX server.
With this system telephone you can send and receive SMS messages (text messages) to/from other phones in a
fixed-line network or to/from mobile phones (see page 32).
Information:
However, sending and receiving SMS messages is only possible, when this phone is connected to specific elmeg
pabxsystems. Pleaserefer to the operating instructionsfor your PABX to determine whether SMS-features are pro-
vided with this particular telephone.
The number for the SMS service provider (max. three providers) must be stored in the telephone in order for you to
send and receive SMSs with your telephone. Messages can be received using any of the three stored SMS servers,
whereastransmittingof messagesiscarried out usingonlythe server youhave enabled forthis. Intheinitial (default)
settings for this telephone the number »0193010« is entered for the SMS center for Deutschen Telekom (German
Telecom) and can be changed as described below.
Begin as follows:
a
Mss
t
Os
Configura
-
tion
Service
Telephone PIN
SMS
<>
O
Select the SMS server or enter the number for your SMS service
provider without the line access digit.
For example: »0193010«.
Confirm your entry with OK.
Message Service {}
Centre numbers
1:0193010 TX
2:
3:
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
Creating and sending SMS messages
You can input a text message using the keypad on the system telephone. A short message is restricted to 612
characters) (iInterlaced SMS). The characters entered will be split into maximally four SMS messages.
Version
Reading the firmware version
Service
73