Operation Manual

t
O
Enter the MSN. In this example: »12«.
This MSN must already be assigned as an »internal number« for
yoursystem telephone via the »Professional Configurator«, or as
-
signed now. This MSN is inactive until the same MSN (internal
number) is entered using the »Professional Configurator«.
Program MSN-1
> 12
Log-on
Information:
Thefollowinginputactionsareoptionalandareusedonlyfor systemsecurity–theyarenot necessarilyrequiredfor
proper functioning of the system.
Simple log-in for DHCP is described on Page . If a PIN has already been given under »Allow configuration« and the
»Log-in name« entered under »Subscriber name« in the »Professional Configurator«, you must now also enter this
information for the IP-S400. You must enter the MSN as the name (only digits are permitted). You can do this using
the »Professional Systel-Configurator« or on the system telephone itself. If you enter the »IPS Log-in PIN« in the
systemtelephonefirst,youmustalsoenterthatinformationinthesubsequentconfiguration for the PABX system.
Entering the IPS Log-in PIN
Begin as follows:
a
Msss>s
Configura
-
tion
MSN MSN-1...MSN
10
IPS Log-In
PIN
t
O
Enter the phone PIN under »PIN«. Only digits are permitted for
this PIN. In the example shown here (factory setting) »0000«.
Confirm your entry by pressing OK.
Input PIN please
> 0000
Entering the »Sys-Server Log-In PIN for the IPS«
Observe the different designations when entering the PIN:
PINnameintheconfigurationwiththe
systemtelephone:
Log-In PIN.
PINnameintheconfigurationusingthe
»ProfessionalSystel-Configurator«forthesystemtelephone:
Log-in-PIN
PINnamefor configurationofthesubscriber
the»ProfessionalConfigurator«for thePABXsystem:
PIN
t Enterthe »Log-in PIN«.When you pressthe 0 key several timesin
a row the possible special characters that can be used are display
-
ed, along with their current position on the key panel. Up to 4 le
-
vels are displayed each time you press the 0 key. When you then
press a key 0...9 the character displayed for that particular key is
selected. Wait until the cursor moves forward one field before at
-
tempting to enter the next character. Only the character that is
currently being entered is visible; characters that have already
been entered are hidden by the asterisk symbol.
Example: Press the key 0 one time and then key 6; the @ symbol is
selected.
Please enter
login PIN
MSN-1> *@_
Please enter
login PIN
1=! 2=% 3=?
4= 5=: 6=@
7=, 8=. 9=0
O
E
Confirm your entry by pressing OK.
Press the
E
button.
Setting up the IP-S400 Configuration
67