Operation Manual

Information:

Youcanonlymakefurthersettings(e.g.callsignalingmelody,volume,name)ifthenumberhasalreadybeenprevi

ously configured.

Setting the melody and the volume

You can define and set a specific melody and its volume for each MSN or extension number that you enter. If you are

usingthe telephone at aninternal ISDN connection of certain elmeg PABX systems, you canprogram special ringing

melodies and a different volume for internal calls.

Inthe initial setting of the telephone, 10 different melodies arestored for call signaling. These 10 melodies can not be

changed.Youcan import afurther 10 melodies into yourphone via aPC. Using the SoundManager supplied withthe

WIN-Tools CD-ROM, you can produce your own tunes on the PC and then load these into the telephone. These

melodies are then stored in your phone as Melody 11 … 20. Ready-to-use melody profiles for downloading to your

phone are located in the WIN-Tools installation directory.

Information:

If you assign a call signaling melody to a number (MSN) that is not stored in your phone, the first permanently sto

red melody in your phone is then used.

Programming a melody (sound)

In the »Program MSN-1« menu press the »Sound« softkey and then the »internal«or»external« softkey. In this

example: »internal«.

Use the arrow buttons to set the desired melody. The bar in the

display indicates the current status.

Confirm your entry by pressing ok.

ˆ Select melody {}

MSN-1,internal 3

−©−−−−−−−−−−

¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬

Setting the volume

In the »Program MSN-1« menu press the »Volume« softkey and then the »internal« or »external« softkey.

Use the arrow buttons to set the volume and the ringer melody.

The bar in the display indicates the current status.

Confirm your entry by pressing ok.

Select call signal {}

MSN-1

- ©©©−− +

¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬

Inadditiontosteady volumes, you can also configurecallsignalingwith an increasing volume.Whenthisisdone, the

volume of the ringing tone is increased automatically as the call is signaled. When the increasing volume function is

Entering a name for an extension number

You can assign your own names (max. 8 characters) to the MSN extension numbers.

Oneach of the buttonson the push-buttonset there are three or four letters of the alphabet. You canadvancethrough

the letters by pressing the appropriate button repeatedly (see page 12). If there are two consecutive letters on the

same button of the push-buttonset, press the right arrow button after entering the first letter and then enter the next

letter.

Display Configuration