Operation Manual

s
Type-Id
PABX-type(softkey»Type-Id«)
Type 0: The PABX system does not transmit the line access digit on incoming calls. The line access digit
mustbeenteredinthephone.
Type1: ThePABXsystemtransmitsalineaccessdigit onincomingcalls.Nolineaccessdigitshouldbeen
-
teredinthephone.
s
Telephonedirectory:
With this setting you can define, whether the telephone directory of the pabx or the telephone book of the
phoneisloaded, whenthe»telephonedirectory«buttonispressed.
s
Numberlength:
The maximum length for internal numbers that are assigned to different internal extensions within your
PABX system.
s
Lineaccessdigit for the pabx:
Thelineaccessdigitisplacedautomaticallyinfrontofthenumberof thecallerfortheexternalcalls.
s
ln.access:
Directexchangelineaccess(softkey»ln.access«)
Withdirectexchangelineaccess,youdonothavetodialthelineaccessdigitforconductingoutgoingcalls.
MSN (extension numbers)
Up to 10 MSN (extension numbers) can be configured on your telephone. When you enter an MSN or extension
number in your ISDN system telephone you are essentially defining that your ISDN system telephone is called using
this MSN or extension number when a call is made. If you enter more than one MSN extension number in your
telephone, your phone will ring each time one of these MSN extension numbers is called.
If you are using your telephone on the external ISDN port of a pabx, enter its internal extension number into the
pabx. Please observe the instructions in the PABX manual.
When you call a subscriber, you can select a certain number (MSN) that is transmitted to the subscriber (e. g. for
separate charges). If you do not select any number, the number (MSN) that has been entered first in the phone
(MSN-1) is used.
Information:
How to configure an MSN (extension number) is described in the following example with »MSN-1«.
Begin as follows:
a
Ms s s
Configuration MSN MSN-1
Program MSN-1 }
transfer
Volume
MSN Name
Sound
MSN ext.
Entering or viewing an extension number (MSN)
You can only enter the MSN extension numbers with the Professional Configurator supplied on the WIN-Tools
CD-ROM. However, you can have the programmed number displayed at the phone. The extended configuration
allows you to enter the MSN extension number after having entered a code number (see page 67).
s
O
In the »Program MSN-1« menu, press the »MSN ext. « softkey.
The programmed number is displayed.
Press OK to leave this menu.
Program dial number
MSN-1>222
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
Configuration Display
64