Operation Manual

Direct call
You can program a direct call for your telephone so that when youpress any key (except for ESC andthe menu key) a
set number will be dialed. If the automatic call function is active only one connection can be established to the set
number. If you wish to establish a connection to a different number you must first deactivate the direct dial-in
function.
AnactivedirectcallisprotectedbymeansofthetelephonePIN(seepage60).Thedirectcallfunctioncanthenonlybe
deactivated after entering this PIN. As long as the PIN is set to »0000« (default setting), you do not need to enter the
PIN and can continue by pressing OK.
The following functions are possible with the automatic dial-in activated:
·
Automatic dialing of the set number after lifting the handset of your phone, or pressing any key
(except for ESC and the F-menu key).
·
Accepting calls, provided these are not suppressed by the call filter.
·
Signaling of previously programmed appointment reminders.
Information:
Further functions (e.g.: function keys, TAPI functions or headset operation) are not possible when direct dialing is
activated.
Programming an automatic call number
Begin as follows:
a
Ms s s
Setting Direct cal MSN ext.
t
O
Enter the telephone number.
In this example: »098765«.
Confirm your entry with OK.
Dir. call-in number
Direct cal>098765
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
Information:
If you are using your telephone with a PABX system without direct exchange line access, first enter the line access
digit to obtain external line access followed by the automatic dial-in number.
Activating direct call
a
Ms s s
Setting Direct cal ok
Direct dialing is now activated. The set direct call number is
shown on the second line of the display.
07:41 Dir. call
098765
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
Deactivate direct dial-in
M The phone is in the idle mode with the direct call-in feature enab
-
led.
Press the menu key.
07:41 Dir. call
098765
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
Acoustic Settings
53