Operation Manual

Date
Appointment reminder volume
You can set various appointments (see page 56) for your phone for which an acoustic and optical signal is issued
when the set date and time are reached. You can set the signaling volume for the appointment as follows.
Begin as follows:
a
Ms>s
Acoustic Date
<>
O
Usethearrowbuttonstosetthevolume. Thebarinthedisplayin
-
dicates the current status.
Confirm your entry with OK.
Appt. call volume{}
- ©©©-- +
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
Audio-Out
Audio-Out-Features
The telephone is equipped with an audio output (Audio-Out socket). Several acoustic telephone functions can be
used in parallel with the local speaker via this output. You can also connect external speakers, for example, to allow a
message to be heard in the entire office.
The following features can be used with the audio output:
·
Message, Open listening, Hands free calling, Calling signals.
Begin as follows:
a
Ms>s
Acoustic Audio Out
s Press the appropriate softkey to switch the external output on or
off.
A checkmark displayed next to the softkey indicates that this fea-
ture will be output through the Audio-Out port. Press the corre-
sponding softkey again to deactivate the audio output. The check
mark next to the softkey is deleted.
Setting for using
Audio Out
Answering machine
Message
Hands-free calling
Signaling tones
Speaker function
Listening to Audio-In over the speaker
When the system telephone is idle, you can listen to audio signals directly from the system telephone speaker. You
canalsolistentoMoHannouncementsorInternetmusicinthismannerifyourPCisnotequippedwithspeakers.
Setting the volume
Begin as follows:
a
M s <> s
Acoustic Audio-In
< Use the arrow buttons to select the desired volume. Audio-In Idle-
Volume
- ©©©−− +
Configuring and setting up the system telephone Acoustic
52