Operation Manual
<>
O
Usethearrowbuttonstosetthevolume. Thebarinthedisplayin
-
dicates the current status.
Confirm your entry with OK.
Handset loudness {}
- ©©− +
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
Temporary volume setting
bg Youliftthehandsetoryouareconductingacall.
M
<>
Press the menu key.
Usethearrowbuttonsto set thevolumeof the handset. Thebarin
the display indicates the current status.
Handset loudness {}
- ©©− +
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
E Press ESC in order to return to the normal display during an ongoing call. If you confirm your entry by
pressingOKinsteadof theESC,thepermanentlysetvalueis overwrittenbythenewlysetone.
Notice tone (announcement and Intercom)
You can adjust the volume of the acoustic signal that is sounded at the beginning of an announcement and during
intercom calls. The settings you have made for »Intercom«« apply for announcements and intercom calls.
Begin as follows:
a
Ms>s
Acoustic Beep tone
<>
O
Use the arrow buttons to set the volume. The bar in the display
indicates the current status.
Confirm your entry with OK.
Notice tone }
volume
------−-Intercom−-------
- ©©− +
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
Announcement
Intercom
Information:
The menu items »Announcement« and »Intercom« do not relate to settings but rather to the use of these features
(see page 20 /21).
Answering machine
You can set the volume of the acknowledgement tone for the answering machine.
Begin as follows:
a
Ms>s
Acoustic Answering
machiner
<>
O
Usethearrowbuttonstosetthevolume.Thebarinthedisplayin
-
dicates the current status.
Confirm your entry with OK.
Volume AnsMc ackn. }
ton
- ©©− +
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
Acoustic Configuring and setting up the system telephone
51