Operation Manual

Acoustic
headset
If a special support feature is stored in your telephone for the headset your are using, set your phone for that headset
model.
For example, the LED in the microphone extension for »Firefly F142 N« from Plantronics can be activated by the
telephone.
Begin as follows:
a
Mss
Acoustic Headset
A check mark displayed next to the individual softkeys indicates the current status.
s Presstheappropriatesoftkeytoconfiguretheconnectedheadset. headset / Acoustic?
PLANTRONICS FIREFLY
Standard
GN Netcom 2100/2200
SILICOMP
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
Speaker
Permanent handset volume setting
Begin as follows:
a
Mss
Acoustic
Speaker
<>
O
Usethearrowbuttonstosetthevolume. Thebarinthedisplayin-
dicates the current status.
Confirm your entry with OK.
Speaker {}
vol.
- ©©©−− +
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
Temporary volume setting
bg Thetelephoneisidleoryou wishtochangethespeakervolumeduringanongoingcall.
L Presstheopenlisteningbutton.
M
<>
Press the menu key.
Usethe arrow buttons to set the volume of the speaker. The barin
the display indicates the current status.
Loudspeaker{}
vol.
- ©©©−− +
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
E Press ESC in order to return to the normal display during an ongoing call. If you confirm your entry by
pressingOKinsteadof theESC,thepermanentlysetvalueis overwrittenbythenewlysetone.
Call waiting
Ifthefunctioncall waiting (seepage55)isenabledon your telephone youcansetthevolume of thecallwaiting signal.
You can also select whether a waiting call is signaled only once, or several times.
Begin as follows:
a
Mss
Acoustic Call wait.
s The check mark next to »repeat« indicates that a waiting call wil
be signaled repeatedly.
Acoustic Configuring and setting up the system telephone
49