Operation Manual
Extended configuration
For a full configuration the following options are available:
·
PC-configuration using the telephone’s USB-port
·
Configuration using the internal ISDN port of a PABX.
·
Extended configuration directly at the phoneYou mustenter a code before you can access the ex
-
tended configuration mode.
Only limited configuration is possible when the telephone isrecognized as a system telephone when connected to an
System PABX system. You have to enter a specific code number in order to enter the telephone’s extended
configuration mode.
If the telephone is not recognized as a system telephone (for example when connected to the NTBA or at an internal
ISDN port of a PABX system that is not part of the system), the extended configuration is activated automatically. In
this case you do not have to input the activation or deactivation codes for extended configuration.
Activating the extended configuration mode
Enter the code »**46 782 551 ##« (Vanity format »**INSTALL1##«).
Information:
Release for remote access of the phone is effected for 30 minutes.
Deactivating the extended configuration mode
Enter the code »**46 782 550 ##« (Vanity format »**INSTALL0##«).
If the ISDN telephone is disconnected from the ISDN network, (for example by unplugging the ISDN connector of
thephone or by switching off orresetting the pabx), the extendedconfiguration mode will be automatically switched
off.
Information:
In the configuration described in the following, performance features and functions that can be only entirely or
partially configured using »Extended configuration« are shown underlined in the display shots.
Example:
s The display shows the performance feature »Direct dialing«,
that can only be configured with »Extended configuration« or
using the »Professional Configurator«. In the “normal configura
-
tion” this performance feature is not shown in the display.
Program tnumbs
Tel. drctry
VIP
direct
Configuring and setting up the system telephone Extended configuration
48