Operation Manual

You can connect the system telephone at the internal S0, Up0 or Ethernet connection of a pabx system. The

telephone provides system features when connected to certain elmeg PABX systems. For example:

Dialing from the pabx telephone directory

Sending and receiving SMS messages

Messaging and intercom callswith other system telephones connected to the pabx.

Function keys for controlling special PABX features (switching call modes, team log-in/off, line

buttons, extension buttons).

The status of the programmed features can be displayed by means of LEDs assigned to the specific

function keys.

Accessing the PABXsystem menu. This menu provides further pabx features.

The internal connection of the PABX systems automatically interfaces with the system telephone. Please refer to the

operating instructions of your PABX to determine whether these typical system features are provided with the

various system telephones.

CS400 / CS400xt

This system telephone is delivered with a key extension module (T400/2), providing you with 10 additional, freely

configurable keys.

It is designed for connection to an internal S0 port (4-wire cable) of a PABX system. The system telephone is not

equipped with a USB or serial port for configuration or other uses. This phone must be configured via the internal

ISDN port using the WinTools Professional Configurator. There are also no »Audio functions« implemented and

you can not use the Answering machine or Up0 modules or functions. None of the functions for this module are

shown in the display, nor can they be used.

This telephone is equipped with the function »Emergency operation«. »Off« = Emergency operation off, »On« =

Emergency operation On. meaning it can be operated at NT via the PABX

system on a loss of 230 V~ power. If more than one telephone is connected to

the ISDN system, the emergency operation function may only be configured

on one of the ISDN system telephones. All calls are signaled at this phone.

The volume of the ringing tone is set to low.

In addition to making normal calls, the following functions are also available:

Selection of a call number from the telephone directory or the speed dial memory after lifting the

handset.

Display of call duration and costs.

Mute.

Terminate call.

The phone number (MSN) that the network service provider assigned to you as the first (master) number will be

transmitted to external subscribers. Charge billing is effected for this. Observe the information concerning

emergency operation in the PABX system. Ongoing connections are interrupted in the event of a power failure.

Information:

Refer to the operating manual of your PABX system to see if your system supports emergency operation.

Description and installation

OFF