Operation Manual

Sending/Receiving of SMS messages is only possible:
·
When you use this telephone with a system telephony pabx system that supports the SMS feature.
·
When you have registered this feature at your network service provider, or the provider of the
SMS center for your ISDN connection.
·
When the phone number for the SMS centeris stored in the telephone.
Consult the provider of the SMS center that has been configured to establish in which networks (fixed-line or mobile
communication network) SMS messages can be sent and the costs for sending and receiving SMS messages. This
telephone does not support the transmission of SMS messages with special content (for example images, audio).
The telephone stores all SMS messages you have received or sent in two separate lists. Up to 10 sent and 10 received
SMS messages can be stored. You can save a maximum of 5 linked SMS (regardless of whether they are double or
quadruple linked). Phones that do not support linked SMSs receive these as individual SMSS messages.
Please not that free storage space must be available to receive SMS messages. You can not receive any further SMS
text messages if you already have 10 SMS messages stored.
SMS messages you have sent can be stored in a list. When this list is full the SMS that was sent last is stored
temporarily.
UUS1 text messages
You can send text messages from one telephone to another without having to call that particular subscriber. UUS1
text messages are limited to 31 characters.
Information:
UUS1text messagescanalso be sent to internal and externaltelephones. Youcanonly use thisfeature with external
telephones if »UUS1 (User to User Signaling)« has been applied for (and approved) for your ISDN connection.
Notethat all terminaldevicesthat are used(telephones,pabx systems) must support thefeature »UUS1 (UsertoUser
Signaling)«.
The telephone stores all UUS1 messages you have received or sent in two separate lists. Up to 10 received an 10 sent
UUS1 messages can be stored.
Please not that free storage space must be available to receive UUS1 text messages. You can not receive any further
UUS1 text messages if you already have 10 UUUS1 messages stored.
UUS1 messages you have sent can be stored in a list. When this list is full the UUS1 text message that was sent last is
stored temporarily.
Creating and sending text messages Creating and sending text messages
You can send a text message to a number stored in your telephone (telephone directory, VIP memory or direct
dialing memory), or input a new number for sending. Todothis, press the corresponding softkey in themenu »Send
mail»Tel. drctry«, »direct«, »VIP«, »New« or »Redialing«.
To select a number assigned to a function key (»direct«) or stored under the redial button, you can also press that
corresponding key.
Information:
WhensendingtextmessagesthefirstnumberMSN-1«)enteredinthetelephoneorthenumberspecifiedbymeans
of the userecall flash button are transmitted with the message.
Begin as follows:
a
>sss
Message SMS or UUS Send mail
SMS and UUS1 text messages Telephone operation
33