Operation Manual

Entering the number of the caller in the phone book of the phone
Begin as follows:
a
s<>M s
Caller list
Select entry
Tel. drctry
t
O
Enter the name.
In this example: Dean.
Confirm your entry with OK.
Input telephone book
Name>Dean`
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
The memo or caller list then displays the name instead of the
number.
5/Dean
Call Today 08:12
Info
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
Entering a memo
You can add a memo number from:
·
the telephone’s phone directory Tel. drctry«)
·
the direct dialing memory / functionkeys direct« softkey)
·
the VIP memory VIP« softkey)
·
the redial list redial« softkey or redial button)
·
or add a new number manually new« softkey).
The following example describes how to add a new number as a memo.
Begin as follows:
a
>ss
Display New
t
O
Enter the number you wish to store as a memo.
In this example: »0123456«.
Confirm your entry with OK.
Memo number create
>0123456_
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
SMS and UUS1 text messages
Withthis phoneyou cansendand receive SMS orUUS1 messages (SMS- Short Message Service, UUS1 - Userto User
Signalling). You can input a text message using the keypad on the phone. The assignments for the keypad for
entering letters, digits and special characters are described on page 12.
Sending and receiving of text messages is only possible when the sender has his/her number transmitted to the
receiving party, where it is also displayed. This is why text messages are not transmitted, or not displayed on the
telephone, when the phone number is not transmitted with the message.
An incoming text message is signaled by two brief acoustic tones in the phone. If the phone is idle, the number of
messages received is displayed, along with information about these messages in the caller list.
SMS Text Messages (subject to terms of network provider)
SMS allows you to send and receive text messages to/from other phones in a fixed-line network or to/from cell
phones. An SMS is restricted to 160 characters, Up to 4 SMS messages with 612 characters can be linked
automatically. A softkey confirmation is required to switch from one SMS to the next.
Telephone operation SMS and UUS1 text messages
32