Operation Manual

Starting a call
Dial number - no correction possible
btg
Dial number
Dial call number - correction possible
atbg
Dial number
To change the number or to correct a wrong entry, select the wrong figure with the arrow buttons and press C to
delete it. Now enter the correct number.
Ifyouwishtoconductthecall usingthe handset, justlift it upafterdialingthe number. Anytimeduringacall you can
switch back and forth between hands-free calling, speaker function and use of the handset.
After you have dialed the number you can also press the speakerecall flash button to have the number dialed and to
use hands-free calling.
If a call can not be put through (e. g. number is inhibited via the dial ranges control, or the account for the
number/MSN is empty), a corresponding message will appear in the display. e.g.:»Inhibit. : dial number«,
when the dialing filter is active.
When you lift the handset and there is still no connection set up, you can pick up a waiting call using the softkey
»pick up« without replacing the handset again. You are notified of the call in advance by a brief message. When you
configure a connection key or a macro key you can pick up a call immediately just by pressing that key.
Other options for dialing without lifting the handset
Theoptionofdialingwithoutlifting the handset andof correcting or adding to a numberalsoexistsduringdialing:
·
from the last number redialing memory (see page 17).
·
from the caller/ memo list (see page 29).
·
from the telephone directory (see page 26).
·
from the VIP memory (see page 28).
·
with the function keys (see page 53).
·
via CTI (TAPI) features (see page 78).
If you are using one of these options, you can make further entries prior to initiating the call. You can define which
number(MSN),ifany,istobetransmittedtotheparty being called. YoucanusetheProfessionalSystel-Configurator
to set which function is to be assigned directly to the softkey »Telephone directory«: »Local« or »PABX«. You can
reach the second function by pressing the R (Recall flash) key.
Dialing from the pabx telephone directory
When you use this telephone with a system telephony supporting pabx system, you can dial from the telephone
directory of the pabx.
a
Rs
t
O<>O
bg
Tel.
drctry
Enter first
letter
Select
entry
Dialing from the telephone directory
You can store up to 250 names and numbers in the telephone directory. To select a name, you can page through the
directory using the arrow buttons, or enter the specific first letter(s) of the name using the push-button set.
Starting a call Making Calls
15