Operation Manual
ß
C key: Press this button to move back one menu step in the menu. If you are currently in the input mo
-
de, this button can be used to delete individual characters.
°
Asterisk key/ hash key
§
Dial buttons
$
Open listening / hands-free button
%
Ending a call
&
Redial button
/
Inquiriy button
(
Microphone
)
CS410 / CS410U / IP-S400: 5 Five programmable function keys with LED: Each button has an inset
two-color LED (level 1 - red / level 2 - yellow). These LEDs can be used to indicate certain functions.
CS400xt: 5 programmable function keys with inset LED
Each button has an LED (red) assigned to it. These LEDs can be used to indicate certain functions.
The LEDs for the two function keys are dual-colored (Level 1 - red / Level 2 - yellow).
=
Label panel for function keys
Q
Status-LED, Call signaling LED, received UUS and SMS messages and MWI (red) and answering machi
-
ne (yellow). It is possible to configure the desired functional display for messages and calls.
Telephone display
1
Date
2
Time
3
21 characters per line
4
Arrow:Furthermenuitemsaccessiblebyusingthearrowkeys.
5
Answeringmachinebuttononthetelephone(optionalmodule)
6
Arrow: Indication of the softkey that can be used in the current
menu.
A checkmark »®« following a display text indicates that this feature is active.
The telephone is equipped with a seven-line backlit display. Backlighting is automatically switched on or off.
After connecting the system to the internal ISDN connection of your PABX system, the date and the time are shown
onthedisplay. Thedateandtimeareimportedautomaticallyfromthepabxsystem. Thetextdisplayed for a function
is always located next to the corresponding softkey. When you pressthe softkey, the next level is displayed. If not all
information fit into the screen, this will be indicated by »««or»««. To have the other characters displayed, press the
R-button first and then the corresponding arrow button.
Varioustelephone display shots are illustratedin thisoperator’s manual tohelp explainthe different settings and use
of the system. A wavy line at the top or bottom of an illustration indicates that not all of the 7 lines of that particular
display are shown (only pertinent lines shown).
Special feature for displaying lists in the display
Several entries are shown in the display as a list for certainsettings or when using the phone. These lists are required
for telephone directory or VIP memory programmings for example.
<> The active entry (the one you have selected) is highlighted. Use
themenuor the OK button todisplay further featuresor selectthe
highlighted entry.
VIP digit to select {}
V0: 0123456
V1: TONY
V2:
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
Description and installation Telephone display and buttons
12
09.03.05 07:00
™Info -D-I-q-
™Tel. Drctry
™VIP
Quiet
‰
Caller list
‰