Operation Manual

Swtich to Use DHCP.

Select »on«. Use automatic IP

adress setting

off

on®

The telephone and PABX system are synchronized.

Information:

If there is no connection to the PABX system (no LAN link, or the telephone has not been logged in), the symbol l

»©-----/ /----‰ « will be shown in the display instead of the time.

You can now use the IP system telephone at the ISDN or UP0 port.

You find a complete description of the configuration on page 68.

Changing the label

Thelabel panels for the functionkeys are included on aseparate sheet enclosedin theoperating instructions. Cut out

the label you wish to use.

To change the label panel, press the flexible cover together between your index finger and thumb and lift it out. The

label panel can now be changed.

You can fill in the label for your telephone with your own information and then print it out using the Professional

Configurator. Alsoavailable on the WIN-Tools CD-ROM is an Adobe Acrobat file containing templates that you can

also fill in and print out.

Pictographs

The pictographs (symbols) described below have been used in these operating instructions to illustrate some

procedures for setting and using the telephone.

b Liftupthehandsetorstartprepareddialing.

a Replacehandset.The telephoneisidle.

l Acallis signaled.Theringermelodysounds.

g Youareconductingacall.

d Athree-partyconferencecallisinitiated.

q Youhearthepositiveornegativeacknowledgementsignal.

t Selectthecallnumber,code,characterortext.

X Thissymbolpromptsyoutoselectacertaindigitorcharacter.

Presstheappropriatebuttononthepush-buttonset.

# WhenyouenterthenumberfordialingviaanSIPprovider,dialingisnotperformeduntilaround5seconds

afterthelastdigit hasbeenentered.Dialingisperformedimmediatelywhenyoupressthe#keyafterente

ringthenumber.Inthiscase,theterminaldevicemustalsobecapableofdialingintothephonesystemwith

the#.

Description and installation Changing the label