Operation Manual

Connection for plug-in power supply unit

Plug-in power supply unit

Ethernet PC-Connection

PC or other IP-telephone

Ethernet-port of the pabx

elmeg pbx

Connecting to and operating the system telephone at the pabx system (basic function including DHCP)

Consult the installation instructions for the PABX system to determine which port can be used for connecting the

IP-S400. Connect this port with the Ethernet PABX port on the system telephone.

Configure your PABX system for use with IP system telephones.

Define the MSNs for the IP system telephones within the PABX system.

Switch on the power (plug-in power supply unit)to the IP systemtelephone and wait until the te-

lephone has been initialized.

Once the IP system telephone has been initialized you will be requested to select the language in the display.

Select the display language.

Press the buttons to view the available languages. Which language?

Italiano

Español

Deutsch

®English

Français

Nederlands

Enter one of the MSNs that has been input to the PABX system

(in the example shown here, 12) .

Confirm your entry by pressing

. Programm dial number

MSN-1>12

If no PIN has been entered in the system configuration,

press button

and button

again after being re

quested to do so.

IPS login PIN for sys

server

MSN-1>

Description and installation

Figure: 7