Datasheet

bintec W2003n
10.04.2015
Subject to technical alterations
Page 8 / 10
bintec elmeg GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25
E-Mail: [e-mail] - www.bintec-elmeg.com
Wireless LAN (Radio 2)
Output power @ 5 GHz Max. 23 dBm (200mW EiRP)
Automatic Rate Selection (ARS) Available
Transmission rate Automatic
Number of spatial streams
(802.11n)
1 or 2
Bandwidth (802.11n) 20/40 MHz (bundling of two adjoining 20 MHz channels to one 40 MHz channel)
Short guard interval (802.11n) On/off switchable; increase of throughput by reduction of the guard intervals from 800ns to 400ns
DTIM Period Adjustable
Extended Performance Feature Beamforming, MRC (Maximum Ratio Combining), Block-Acknowlegde
Multi SSID Up to 16 service sets per radio module, with virtual access points and own MAC address per SSID.
Broadcast SSID On/off switchable
Power management for clients Registering of up to 250 clients per radio module simultaneously in access point mode. Default is
32 clients.
Country-specific settings Channel settings according regulatory domain (802.11d) permitted.
RTS/CTS RTS/CTS threshold adjustable
Energy Savining Functions
Mimo 1x1 shift down The radio modules switching automatic to Mimo 1x1 operation, when no client is connected
802.3az support The ethernet interfaces reduce the power consumption automatically, in case that no device is
connected. In the case of the usage of a short ethernet cable, the circuit reduce the transmit
power.
LED Mode The LEDs has three operation mode: Status, Flashing, Off
Maintenance
Configuration a. maintenance:
Configuration a. maintenance:
Device configuration via
Telnet, SSH, HTTP, HTTPS, SNMP
Configuration a. maintenance:
SNMP
SNMP (v1, v2, v3), USM model, VACM views, SNMP traps (v1, v2, v3) configurable, SNMP IP access
list configurable
Configuration a. maintenance:
SNMP configuration
Complete management with MIB-II, MIB 802.11, enterprise MIB
Configuration a. maintenance:
SSH Login
Supports SSH V1.5 and SSH V2.0, for secure connections of terminal applications
Configuration a. maintenance:
HTTP/HTTPS
Web-based configuration (FCI). The user interface is identical with almost all bintec elmeg
products.