Datasheet

bintec W2003n
10.04.2015
Subject to technical alterations
Page 4 / 10
bintec elmeg GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25
E-Mail: [e-mail] - www.bintec-elmeg.com
bintec W2003n (5510000324) W2003n, WLAN Access Point with a dual concurrent radio module according
802.11abgn (2.4/5 GHz) Mimo 2x2, 2 Gigabit ETH, PoE, integr. Antennas, incl.
wall/ceiling mounting, incl. WLAN Controller license for Master AP, shipment
without 100-240V wall adapter
Features
Operation Modes
WLAN operation mode Transparent WLAN client to connect directly ethernet devices
WLAN operation mode WLAN Access Point (Managed Access Point; Master Access Point for 6 Aps; Standalone Access Point;
Standalone Access Point + Bridgelink Master)
WLAN operation mode Bridgelink (Point-to-multipoint) with up 8 links
WLAN WLAN = Radio off; WLAN = Stand alone Access Point; WLAN = Managed Access Point; WLAN =
Master Access Point for 6 APs
Security
Performance Monitoring Tracks performance values for complete WLAN Controller, for the Access Point, the SSID anf for the
dedicated, connected WLAN clients. This feature helps to analyze performance or to figure out
bottlenecks. This feature requires a WLAN Controller.
Encryption WPA/WEP WPA personal, WPA enterprise, WPA2 personal, WPA2 enterprise, WEP64 (40 Bit key), WEP128 (104
Bit key)
IEEE802.11i authentication and
encryption
802.1x/EAP-MD5, 802.1x/EAP-TLS, 802.1x/EAP-TTLS, 802.1x/EAP-PEAP, key management, PSK/TKIP
encryption, AES encryption, 802.1x/EAP
Access control list (ACL) MAC address filter for WLAN clients (white list) and dynamic and static blacklist. Black list function
requires WLAN Controller
WIDS (Wireless Intrusion
Detection System)
Rogue AP detection: detect foreign Aps, which try to spy out data via SSIDs by permanent
background scanning. This functionality requires WLAN Controller.
WIPS (Wireless Intrusion
Protection System)
Rogue Client Detection: detection and protection: detect conspicuous clients, which try to intrude
or interfere the wireless network.In threat case blocking by dynamic black list. This functionality
requires WLAN Controller.
WIDS (Wireless Intrusion
Detection System)
Neighbor AP Detection: detection of neighbor Aps with possible influence on performance of own
network. By detected intrusion: SNMP trap or email alert. This functionality requires WLAN
Controller.
VLAN Network segments on layer2 possible. Per SSID one VLAN ID available. Static VLAN configuration
according IEEE 802.1q; up to 32 VLANs supported.
Inter cell repeating Inter traffic blocking for public HotSpot (PHS) applications for preventing of communication radio
client to radio client in a single radio cell.
Software
Airtime Fairness Prevent performance limitation by slower or distant clients, which block the network
Client Band Select Shifting of clients to 5 GHz band