Datasheet

Configuration access
Feature Description
General configuration Configuration of the hybird is web-based and is done via the 'Funkwerk User Interface' (FCI).
The following are supported: Internet Explorer Version 7 or higher, Firefox Version 2 or higher
Web configuration Configuration access is implemented both locally and remotely via IP: HTTP/HTTPS without
signed certificate.
Remote configuration via ISDN (1) Access to the hybrid can be done both remotely as well as via S0. Remote web browsing
accessed via external ISDN S0 with X.75 / HTTP protocol
Remote configuration via ISDN (2) Remote access can be enabled for 30 minutes or permanently; access only by dialling with
special service configuration management tool
Remote maintenance ISDN Login/Telnet access
Firmware download Via IP
DIME Manager support The hybird can also be configured via the DIME Manager.
Management Management via SNMP, SSH
SNMP browser Integrated in FCI
Voice applications
Feature Description
General voice applications Voice applications are based on WAV files with music, announcements etc. Max. 8 voice
applications can be configured as: announcement before query, infobox, wake-up message or
MOH; WAV files are stored on the memory card (SD).
Announcement before query (Auto
Attendant) - includes IVR (Interactive
Voice Response with DTMF)
When in 'Announcement before query' mode, the call is automatically accepted via the
application and a WAV file with instructions is played. Automatic transfer function by dialling
the corresponding extension no., or the DISA speed dial number
Announcement/infotext A WAV file can inform the caller of any changes to opening hours in the form of an
announcement/infotext.
Volume control of files The WAV files can be adjusted by a volume control.
Wake-up message Wake-up calls for guests can be set up in conjunction with the hotel application.
Music on hold Music on hold (MoH) can be configured based on WAV files.
Call transfer
Feature Description
Hold for enquiry Can be freely executed on all internal or external extensions. Possible functions: Disconnect
active connection, disconnect connection on hold, redial. The extension on hold shall hear
MoH.
Hold for enquiry Hold for enquiry from an active connection to an internal/external extension. The other
extension is held in the system.
Transfer to busy extension A call can be transferred to a busy extension. At the end of the call the connection is made.
Automatic return to the original extension after time has expired.
Exchange to exchange transfer Following the return of an existing exchange connection to the exchange, both external
channels can then be interconnected. Not available for FXO
Transfer without advance notice (blind
transfer)
Transfer a call by replacing the receiver from the hold for enquiry.
Transfer with advance notice Transfer a call by replacing the receiver from the hold for enquiry after notifying the extension
Transfer (ECT) Transfer of calls in exchange (if LM available). Can be reached via FCI, although
external-external ECT is allowed.
Transfer of active call through call
waiting
Analogue terminals can transfer the incoming call with R5 etc whilst on the call via the code
procedure.
Funkwerk Enterprise Communications GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - (0)911 9673 0
Fax: +49 - (0)911 688 0725
E-Mail: [e-mail] - www.funkwerk-ec.com
hybird
11.03.2011
Subject to technical
alterations