Datasheet

Team functions
Feature Description
Team function - General (1) Several extensions are put into teams if they can be reached both internally and externally
using 1 call number, e.g. such as: Service, Sales, Development etc. Each extension shall have
its 'own call number' within the team.
Team function - General (2) 16 extensions can be put into one team. Divisible call signalling can be configured for each
team. Team call assignments are allocated to each team. The switching on of call
assignments can either be done manually or automatically.
Release For a particular team, a release to another team can be configured.
Call assignments 4 call assignments are allocated to each team, these can be switched on either manually or
via calendars.
Call forwarding (1) In the system it can be configured as to whether the call forwarding of individual team
extensions is done for 'simultaneous' or 'establishing' team calls.
Call forwarding (2) It can also be set up whether a call forwarding should be done externally in the VST via call
deflection/partial rerouting and should be cancelled if the entire team call is successful.
Call list control (SysTels) If an answering machine within the team accepts the call, the call will remain in the call lists for
all telephones.
Call signalling Call signalling can be individually configured for each team: simultaneous, linear, rotating,
constructing, parallel after a period of time, uniform call assignment according to average talk
time.
Busy on Busy The Busy on Busy function switches the entire team to 'busy' provided that a pre-determined
number of team extensions are on the telephone at the time; any further calls to the team are
rejected.
Automatic call acceptance (with
parallel signalling within the team)
Team calls can be accepted with MOH; the team extensions are then called in parallel. Once a
team extension accepts the call, the connection is made.
Transfer functions Transfer functions can be configured for each team: busy options, release options, transfer to
busy extensions, automatic release immediately/if busy/if no reply.
Team announcement (1) The team announcement function makes it possible to make an announcement to the team
extensions. The team extensions hear the announcement at the same time; a notification tone
signifies the announcement.
Team announcement (2) The announcement can be accepted by lifting the handset. A direct connection is then made.
Not Rel. 1
Team call signalling to
internal/external terminals
The team call signalling can be done to internal team extensions or to external call numbers.
The allocation is done in the call assignments, which can be controlled via the calendars.
Team log in/log off Team extensions can log themselves in and out of the team. This is possible for both
individual as well as all teams; if all extensions are logged out then a call is released to the
default destination.
Door terminals
Feature Description
Door terminals - General (1) Door terminals can be switched on on internal FXS ports. For each door terminal, 8 internal
extensions or 1 external call nr. (chemist's circuit) are included in the call signalling each time
it is rung. Refer to call signalling in the day/night service
Door terminals - General (2) Door terminal authorisations (call door terminal/open door) are done via the CoS. The door
terminal switching authorisation (day/night) can be configured for each extension via CoS;
door intercom calls can be picked up.
Doorbell signalling The signalling time can be programmed for both internal and external use. The monitoring can
be switched on or off.
Door terminal external call monitoring A timer limits the call duration. Can be configured for each door terminal and doorbell
Door terminal call signalling The call signalling duration can be adjusted.
Funkwerk Enterprise Communications GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - (0)911 9673 0
Fax: +49 - (0)911 688 0725
E-Mail: [e-mail] - www.funkwerk-ec.com
hybird
11.03.2011
Subject to technical
alterations