Datasheet

PABX functions I
Feature Description
Alphanumeric central phonebook 1000 entries in phonebook, individual authorisation for phonebook access, import/export
possibility, name display on phonebook
Analogue ports - internal To connect analogue terminals: MFC dialling method, adjustable flash times, setting as:
phone/fax/modem/answ.machine/combination device, name display on phonebook for
(CNIP/CNIR), transfer of phone numbers to internal analogue ports (CLIP, CLIP off Hook)
Internal call waiting Call waiting is signalled by a call waiting tone on FXS ports. Possible procedures: ignore call
waiting (timeout after 30 secs), accept directly, accept through hold for enquiry, reject
Call waiting protection The call waiting protection is configurable per FXS extension (Ext.) as well as via Class of
Service (CoS); the ext. is implemented in the terminal for ISDN extensions.
Do not disturb feature for internal
ports (1)
The do not disturb feature (at rest) for FXS ports is configurable for a) just internal calls, b) just
external calls, or c) internal and external calls;
Do not disturb feature for internal
ports (2)
a special dial tone signals that the do not disturb feature is active; it shall however be possible
to accept calls whilst in do not disturb mode.
Call assignments Team and door terminal lists can be automatically switched on via programmable weekly
calendars. It shall be possible for an authorised extension to manually switch on
Set up call forwarding remotely Call forwarding can be remotely carried out in the system.
Call forwarding (CF) immediately/after
a period of time/when busy (1)
This function can be set: immediately, after a period of time, when busy (parrallel operation
also possible); signalling of 'forwarded calls' with call forwarding number
Call forwarding (CF) immediately/after
a period of time/when busy (2)
Set up of call forwarding for internal extensions via user portal as well. The call forwarding set
up is also possible with standard telephones via the telephone code procedure; this can also
be done externally via the 2nd B channel.
Call forwarding during a call (CD - call
deflection)
Automatic call deflection to PtMP connector if an incoming external call is to be forwarded
externally.
Call forwarding during a call (partial
rerouting) for PtP
Automatic execution if a internal extension has set up an external call forwarding. In the event
of failure the call forwarding is done via the 2nd B channel.
Release (if dialled incorrectly, or if no
answer)
Release to a configurable destination in the event of: incomplete DDI (after a period of time); if
dialled incorrectly and if all team extensions are logged out etc.
Call assignment External calls can be flexibly assigned to extensions, teams or to voice applications as well.
Exchange access right The exchange access right can be set at different levels per user: internal, incoming, local,
national, unlimited.
Switchable exchange access right The exchange access right can be controlled via the calendars through appropriate
authorisation in the CoS
Automatic outside line The automatic outside line is configurable per user; an internal number can therefore be
dialled by pressing *
Service-specific exchange access A line with 'Fax G3 service can be occupied by dialling a code from a FXS terminal (combi
port).
Global exchange access The dialling code (typically 0) can be programmed freely.
ARS Automatic route selection (LCR) is a dial control with a telephone number-dependent bundle
selection. ARS is configurable per extension via the CoS.
Authority matrix (Class of Service) The CoS contains a list of functions for the user; the CoS can be switched via the
calendars/manually.
Bundle formation/division Authorisation to assign a bundle is done via the CoS.
Funkwerk Enterprise Communications GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - (0)911 9673 0
Fax: +49 - (0)911 688 0725
E-Mail: [e-mail] - www.funkwerk-ec.com
hybird
11.03.2011
Subject to technical
alterations