bintec W1002n o WLAN according to IEEE 802.11n o Dual-band radio module with 2.4 GHz and 5 GHz o Physical data rates of up to 300 Mbps o Compatible with IEEE 802.11agbh devices o Operation as access point, bridge, WDS, client o Integrated VPN router, providing up to 110 tunnels simultaneously o Distinct increase of data rates for LAN-to-LAN coupling compared with conventional WLAN bridges o PoE (Power over Ethernet) according to IEEE 802.3af With the IEEE 802.
Operating Modes Feature Description WLAN disabled In this operation mode the device is a powerful 2-port VPN router WLAN access point WLAN access point with VPN router functionalities WLAN bridge Point-to-point and point-to-multipoint mode (up to 8 links) WLAN client Transparent client for direct connection of Ethernet devices Security Feature Description Encryption WEP/WPA WEP64 (40 Bit key), WEP128 (104 Bit key), WPA personal, WPA enterprise, WPA2 personal, WPA2 enterprise IEEE802.
Wireless LAN Features Feature Description WLAN standards 802.11n (Mimo 2x3); 802.11b; 802.11g; 802.11a; 802.11h Frequency bands 2.4 GHz indoor/outdoor (EU) 2.4 GHz Indoor/Outdoor (2412-2472 MHz) max. 100 mW EiRP. This information is related to the permitted transmission power in Germany. The permitted transmission power may vary in other countries. Frequency bands 5 GHz indoor (EU) 5 GHz indoor (5150-5350 MHz) max. 200 mW EiRP allowed.
value is 32 clients. Country-specific settings Channel settings according regulatory domain (802.11d) permitted. TPC TPC (transmission power control): For 5 GHz, automatic reduction of transmission power according EN301893 DFS DFS (dynamic frequency selection): For 2.4 and 5 GHz, channels are dynamically used depending on operating grade. DFS is implemented in bridge links master and slave.
Maintenance and Service Feature Description Configuration a. maintenance: Device configuration Configuration via a. maintenance: SNMP Telnet, SSH, HTTP, HTTPS, SNMP Configuration a. maintenance: SNMP configuration Configuration a. maintenance: SSH Complete management with MIB-II, MIB 802.11, enterprise MIB Login Configuration a. maintenance: HTTP/HTTPS Web-based configuration (FCI). The user interface is identical with almost all Funkwerk products.
Software Features Feature Description Roaming (access point mode) Seamless roaming with IAPP (artem Inter Access Point Protocol) Fast roaming 802.1x (access point mode) Roaming behaviour (client mode) Pre authentication and PMK caching allows fast roaming by 802.
