Datasheet

Software Features
Feature Description
Bridging Transparent Mode
Ethernet Blue Book Supported by all ComPoint Variations.
Buffer Pool For compensation of load peaks
QoS Data Priorisation for IP-TOS evaluation, 802.11e/WMM
BLD Broken Link Detection (BLD) per SSID possible.
Statistics Wireless Extended Statistics, Sorted by clients and by data rate.
Console Logging Events via Telnet and HTTP visible
Syslog Client, with different levels of messaging.
DHCP Client
Power Management For Clients Number of Managed Clients per Radio: Up to 250 at the same time.
IAPP Roaming with Artem Inter-Access-Point-Protocol (IAPP)
WDS Wireless Distribution System: Interoperabel with other devices from the Funkwerk-EC Portfolio
Bridge: Point-To-Point /
Point-To-Multipoint
Point-To-Point Connection Between Two ComPoints; Point-To-Multipoint Connection Between
one ComPoint and up to six partner ComPoints
Bridge Full Remote Configuration: Proprietary Artem protocol with encrypted transmission. RTS/CTS
Threshold: Adjustable; Operating Channels: According to the regulatory domain. Transmit
Speed: Auto fallback or selectable fixed rate.
Bridge Linktest Via the linktest the quality of a bridge link can be measured.
Bridgelink encryption With high sequrity TKIP and AES possible
Hardware Features
Feature Description
Standards Wi-Fi Certification for IEEE 802.11g; IEEE 802.11a,b,g,d,h,i; IEEE 802.3, IEEE 802.3af, IEEE
802.1q (VLAN Tagging)
Certifications R&TTE Directive 1999/5/EG; EN 60950 (IEC60950); EN 300 328-1/2; ETSI EN 301 489-1/17,
EN60601-1-2 (medical)
LAN / WAN 2 x 10/100 Mbps Ethernet twisted pair, autosensing, auto MDI/MDI-X
WLAN W1002/W2002: IEEE 802.11b/g 1 or 2 internal radio modules, 2,4 und 5GHz Band, 2 or 4
external antennas (Antenna Diversity), max. 100mW RF output power
Antenna Antenna connector: RTNC jack
Real time clock Even at power loss the system time will be available for several hours.
Power supply External AC/DC converter 12 V DC, 1 A
PoE Power-Over-Ethernet compliant to IEEE 802.3af, the injector must support maximum power
(class 0)
Status LEDs W1002: Status+Activity for WLAN, Ethernet 1, Ethernet 2; W2002: Status+Activity for WLAN
1, WLAN 2, Ethernet 1, Ethernet 2
Wall mounting kit Optional
Dimensions Approx. 16.3 cm by 16.8 cm by 5 cm (w by d by h)
Weight Approx. 200 g
Power consumption Max. 1A at 12V
Environment Temperature range: Operational 0°C to 40°C; Storage -10°C to 70°C; Max. rel. humidity 10 -
95% (non condensing)
Funkwerk Enterprise Communications GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - 180 300 9191 0
Fax: +49 - 180 300 9193 0
E-Mail: [e-mail] - www.funkwerk-ec.com
bintec W1002 | W2002
23.02.2009
Subject to technical
alterations