Datasheet

Teldat GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25
E-Mail: [e-mail] - www.teldat.com
bintec WI1065n
16.03.2012
Subject to technical alterations
Page 8 / 10
Software
Roaming (access point mode) Seamless roaming with IAPP (artem Inter Access Point Protocol)
Fast roaming 802.1x (access
point mode)
Pre authentication and PMK caching allows fast roaming by 802.1x encryption
Roaming behaviour (client
mode)
Adjustable (no, slow, normal, fast, customized roaming). Adaptable for fast movable client (i.e.
vehicle), to guarantee a roaming without interruption. This is achieved by scanning of the relevant
channels in the background.
WDS Wireless Distribution System: Include high security TKIP and AES, interoperable with other devices
from the Teldat GmbH portfolio (not bintec W500)
Bridge: point-to-point /
point-to-multipoint
Point-to-point connection between two access points, point-to-multipoint connection between up to
eight partners access points
Bridge Full remote configuration: Protocol with encrypted transmission. RTS/CTS threshold adjustable.
Operating channels: According to the regulatory domain. Transmit speed: Auto fallback or
selectable fixed rate.
Bridge link test Via the link test the quality of a bridge link can be measured.
Bridge link encryption With high security TKIP and AES possible
Client mode Routing or bridge mode possible. In bridge mode multiple IP based end devices can be operated
simultaneously and additionally one non-IP-based end device
Buffer pool For cushioning of peaks
WMM 802.11e QoS Data prioritization for TOS data, 802.11e/WMM
WMM Power Save (U-APSD) Support of active WLAN clients, which support 802.11e power save
Internet dialup PPPoE, PPTP
Load balancing Session-round-robin, load-dependent bandwidth
BLD Broken Link Detection (BLD) per SSID possible.
NTP NTP client, NTP server, manually
DNS DNS client, DNS server, DNS relay
DHCP DHCP client, DHCP server, DHPC relay
Hardware
Certifications Wi-Fi Certified according 802.11abgn (Rel.7.9.4)
Standards and certifications R&TTE Directive 1999/5/EG; EN 60950-1 (IEC60950); EN 60950-22; EN 301489-1; EN301489-17; EN
55022; EN 300328-1; EN 301893; EN 302502; EN 50371
Wifi Certification Wifi Certified product according IEEE 802.11abgn under preparation
LAN / WAN 2 x 10/100 Mbps Ethernet twisted pair, autosensing, auto MDI/MDI-X
Optical WAN/LAN Interface SFP slot for 100 Mbps Fibre Transceiver. Only one ETH interface is activated, if SFP module is
plugged
Serielle Schnittstelle V.24 interface with D-Sub9 jack for configuration
WAN IEEE 802.11a/b/g/n; 1 radio module, 2.4 und 5 GHz band, 3 external antennas
Antenna Three antenna connectors with RTNC jacks; delivered incl. three 2 dBi omni-directional antennas