Installation Guide

Table Of Contents

Fijar la parte C en la cara ﬁnal de la placa(2)(3)(4), luego conectar la parte(1) y el marco principal apretando la parte B.

Install part DR on the board(22) by tightening part E.

Install part DL on the board(23) by tightening part E.

Fijar la parte A en el tablero(21).

Conecte la placa(22)(23) y la placa(24) apretando la parte F, luego conecte la placa(25) y la placa(22)(23)(24), luego

conecte la placa(21) y la placa(22)(23) apretando la parte B.Instale la perilla en el tablero(21) apretando la parte W.

Fix part C on the end face of the board(2)(3)(4), then connect part(1) and the main frame by tightening part B.

Instale la parte DR en el tablero(22) apretando la parte E.

Instale la parte DL en la tabla (23) apretando la parte E.

Fix part A on the board(21).

Connect board(22)(23) and board(24) by tightening part F, then connect board(25) and board(22)(23)(24),

then connect board(21) and board(22)(23) by tightening part B.Install the knob on the board(21) by tightening part W.