Installation Guide

Note: After opening the package, please immediately check the
product for any damage or missing parts in transit. If anything is
missing, please contact us. This document describes how to
install and maintain devices.
！
PACKING LIST
ELECTRIC DRILL PENCIL
SCREWDRIVER
TAPE MEASURE
INSTALLATION TOOLS
1. The voltage range of this product is 110V.
2. You can connect the wire from the back center of the mirror directly
to your electrical connection box or plug.
3. Use the product with care to prevent the sides and edges of the glass
from being impacted.
4. Before drilling, ensure that there are no hidden pipes and cables in
the wall.
5. Ensure that the fixed position can support the weight of the whole
accessories. (solid stone/brick wall)
6. Disconnect the power supply before installing, adding, or replacing
any component.
7. It is recommended that the installation be carried out by qualified
technical personnel.
8.Wear proper eye protection when drilling. Be careful when using
power tools near the water.
9. It is recommended that at least two persons perform the installation
together.
BEFORE INSTALLATION
3
4
！
Congratulations on your purchase of the Smart LED
light mirror. Please read these instructions carefully before
starting installation.
3 3