T1061UM(p1-35).QX3 04.7.8 3:58 PM Page 1 OWNER’S MANUAL COLOR TV/VCR/DVD TRIPLE COMBO SSF420TR (20 inch) SUPPLIED ACCESSORIES ACCESSORIES PART NO. Remote Control Unit NE236UD INSTRUCCIONES EN ESPAÑOL INCLUIDAS. As an ENERGY STAR ® Partner, our company has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency. ENERGY STAR ® is a U.S. registered mark.
T1061UM(p1-35).QX3 04.7.8 3:58 PM Page 2 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. RISK OF ELECTRIC SHOCK DO NOT OPEN THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
T1061UM(p1-35).QX3 04.7.8 3:58 PM Page 3 F IGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECT RICAL CODE ANTE NNA L EAD I N WI RE GROUND CLAMP A NTENNA DI SCHARG E UN I T (NEC SECTION 8 10 -2 0) EL ECT RI C SE RV I CE EQ U I PM EN T G RO UNDI NG CO NDUCT ORS (NEC SECTION 8 10 -2 1) G RO UND CL AM PS NEC - NATI O NAL EL ECTRI CAL CO DE POWER SERVI C E G RO UNDI NG EL EC TR O DE SYST EM (NEC ART 2 50 , PART H) S2 8 9 8 A 13.
T1061UM(p1-35).QX3 04.7.8 3:58 PM Page 4 PRECAUTIONS LASER SAFETY This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. IMPORTANT COPYRIGHT INFORMATION Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates copyright protection technology that is protected by method claims of certain U.S.
T1061UM(p1-35).QX3 04.7.8 3:58 PM Page 5 LOCATION WARNING For safe operation and satisfactory performance of your TV/VCR/DVD, keep the following in mind when selecting a place for its installation: • Shield it from direct sunlight and keep it away from sources of intense heat. • Avoid dusty or humid places. • Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top or bottom of the unit.
T1061UM(p1-35).QX3 04.7.8 3:58 PM Page 6 TABLE OF CONTENTS C IMPORTANT SAFEGUARDS . . . . .2 C PRECAUTIONS . . . . . . . . . . . . . . . .4 LOCATION . . . . . . . . . . . . . . . . . . .5 AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE .5 WARNING . . . . . . . . . . . . . . . . . . . .5 SYMBOLS USED IN THIS MANUAL . . . . . . . . . . . . . . . . . . . . .5 C TABLE OF CONTENTS . . . . . . . . . .6 C FEATURES . . . . . . . . . . . . . . . . . . . .7 C OPERATING CONTROLS AND FUNCTIONS . . . . . . . . . . .
T1061UM(p1-35).QX3 04.7.8 3:58 PM Page 7 FEATURES TV/VCR Mode • Hi-Fi system–The Hi-Fi stereo recording/playback • 2 Step picture search operation–You can view a • • Three different playback tape speeds : SP/LP/SLP • Two different recording tape speeds : SP/SLP • Auto Head Cleaner–Automatically cleans video • • system offers you excellent sound quality with a dynamic range of 80dB, frequency response from 20Hz to 20kHz, and 0.005% wow and flutter.
T1061UM(p1-35).QX3 04.7.8 3:58 PM Page 8 DVD Mode ¡On-screen display ¡Dolby Digital sound This TV/VCR/DVD can output a Dolby Digital surround signal from the coaxial digital audio output jack. Information about the current operation can be displayed on a TV screen, allowing you to confirm the currently active functions (such as program playback), on the TV screen using the remote control.
T1061UM(p1-35).QX3 04.7.8 3:58 PM Page 9 OPERATING CONTROLS AND FUNCTIONS - TV/VCR/DVD FRONT PANEL - [Fig.1] DVD buttons POWER PO WER SKIP VOLUME PLAY SKIP STOP TV/VCR buttons OPEN/CLOSE SELECT CHANNEL SEARCH 2 3 4 3 - REMOTE CONTROL - POWER PICTURE 1 22 23 1 2 3 4 5 6 7 8 27 28 29 30 31 32 33 0 SPEED CH. 11 VOL. 2 MUTE PLAY DISC MENU DISPLAY ENTER SETUP TITLE RETURN CLEAR SEARCH MODE REPEAT A-B AUDIO ANGLE MODE SUBTITLE PLAY F.
T1061UM(p1-35).QX3 04.7.8 3:58 PM Page 10 - TV/VCR/DVD REAR PANEL - [Fig.3] AUDIO OUT COAXIAL ANT. 46 47 20. AUDIO L/R input Jacks Connect to the audio output jacks of a video camera, VCR, video game system. 21. Cassette compartment 22. PICTURE Button Press to adjust the picture. 23. Number Buttons TV/VCR Mode: [P.18] Press two digits to directly access the desired channel. Remember to press a “0” before a single digit channel.
T1061UM(p1-35).QX3 04.7.8 3:58 PM Page 11 46. ANT. in Jack Connect to an antenna, cable system or satellite system. 47. Power cord Connect to a standard AC outlet (120V/60Hz). NOTE: Remove the power cord from the hook to avoid breaking a wire before you connect to a standard AC outlet. 48. COAXIAL digital audio out Jack Connect to the digital input of an external Audio receiver. NOTE: Only DVD and CD audio will be output from this jack.
T1061UM(p1-35).QX3 04.7.8 3:58 PM Page 12 TO RECORD A SCRAMBLED/UNSCRAMBLED CHANNEL 1. Set the TV/VCR/DVD channel selector to the output channel of the Cable Converter Box or Satellite Box. (Ex. CH3) 2.Select the channel to record on your Cable Converter Box or Satellite Box.
T1061UM(p1-35).QX3 04.7.8 3:58 PM Page 13 CONNECTING TO A STEREO RECEIVER EQUIPPED WITH DIGITAL INPUT JACKS Use an audio coaxial digital cable available at retail stores for the audio connection. AUDIO OUT COAXIAL ANT. Receiver equipped with digital input jacks To COAXIAL DIGITAL AUDIO INPUT jack DIGITAL AUDIO OUT COAXIAL NOTE: DVD, CD audio only [Fig. 6] NOTES: • A 5.1 channel Dolby Digital surround format cannot be recorded as digital sound.
T1061UM(p1-35).QX3 04.7.8 3:58 PM Page 14 CONNECTING TO RECEIVER WITH A DOLBY DIGITAL DECODER (for DVD) If using this TV/VCR/DVD to play a DVD disc in a 5.1 channel Dolby Digital surround format, the TV/VCR/DVD outputs a DOLBY DIGITAL Data stream from its COAXIAL digital audio out jack. By hooking the TV/VCR/DVD up to a Dolby Digital decoder, you can enjoy a more convincing, realistic surround sound as enjoyed in movie theaters.
T1061UM(p1-35).QX3 04.7.8 3:58 PM Page 15 TV/VCR SECTION SET UP FOR USE SELECTING THE LANGUAGE CLOCK SET UP (AUTO / MANUAL) TV/VCR 1 TV/VCR Plug in the TV/VCR/DVD power cord Plug the TV/VCR/DVD power cord into a standard AC outlet. NOTE: • If any digits appear in the corner of the screen, press the POWER button without unplugging the power cord. Make sure ... • Press the SELECT button to select TV/ VCR mode or make sure TV/ VCR lights on. • Press the POWER button to turn on the TV/VCR/DVD.
T1061UM(p1-35).QX3 5 04.7.8 3:58 PM Select the year Press the Arrow button K or L until your desired year appears. (Example: 2004) Then press the Arrow button B. 6 Select the hour Press the Arrow button K or L until your desired hour appears. (Example: 5, PM) Then press the Arrow button B. 7 Select the minute Press the Arrow button K or L until the desired minute appears.
T1061UM(p1-35).QX3 04.7.8 3:58 PM Page 17 NOTE: During Auto Clock CH Search, the picture may be distorted, this is normal. DAYLIGHT-SAVING TIME TV/VCR 4 Enter the channel number that contains the Automatic Clock Setting Signal Select this feature and the TV/VCR/DVD’s clock automatically will advance one hour in April, then reverse one hour in October.
T1061UM(p1-35).QX3 04.7.8 3:58 PM Page 18 DELETING (OR ADDING) CHANNEL(S) CHANNEL SET UP TV/VCR You can program the tuner to preset all the channels you receive in your area. NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select the TV/VCR/DVD channel to the output channel of the cable box or satellite box (Ex CH3), then select the channel to be viewed on the Cable Box or Satellite Box.
T1061UM(p1-35).QX3 04.7.8 3:58 PM Page 19 TV OPERATION WATCHING A TV PROGRAM PICTURE CONTROL TV/VCR 1 Turn on the TV/VCR/DVD Press the POWER button to turn on the TV/VCR/DVD. 2 Select the channel number Press the CHANNEL button K or L to select your desired channel number or press the number on the remote control. Note for using the Number button on the remote control: ¡You must precede single-digit channel numbers with a zero (For example: 02, 03, 04 and so on).
T1061UM(p1-35).QX3 04.7.8 3:58 PM Page 20 CLOSED CAPTION SYSTEM 1 TV/VCR You can view specially labeled (cc) TV programs, movies, news and pre-recorded tapes with either a dialogue caption or text display. CAPTION mode: By choosing the caption mode, you can watch dramas, movies and news while captioning the dialogues and the contents of news. TEXT mode: By choosing the text mode, you can watch half screen text information if you want.
T1061UM(p1-35).QX3 04.7.8 3:58 PM Page 21 V-CHIP SET UP SUB RATINGS V-CHIP SET UP TV/VCR V-CHIP SET UP 1 Make sure ... • TV/VCR/DVD is turned on. 1 Select “V-CHIP SET UP” Press the SETUP button on the remote control. Press the Arrow button K or L to select “V-CHIP SET UP”. Then press the ENTER button. 2 Select “V-CHIP SET UP” Press the SETUP button on the remote control. Press the Arrow button K or L to select “V-CHIP SET UP”. Then press the ENTER button.
T1061UM(p1-35).QX3 04.7.8 3:58 PM Page 22 CHANGING V-CHIP BLOCKED PROGRAMMING Note: To change the rating, the TV must be turned to a station that is not protected. If the (PROTECTED) appears on the screen, please change the channel to a station that is not protected. 1)Follow steps [1] to [2]. 2)Press the Arrow button K or L to select “TV RATING”. Then press the ENTER button. Select a TV rating to be unblocked by pressing the Arrow button K or L. Then press the ENTER button to unblock the rating.
T1061UM(p1-35).QX3 04.7.8 3:58 PM Page 23 MTS (Multi-Channel Television sound) SYSTEM You can record or listen to a program in MTS stereo. CHECKING THE SELECTED MTS MODE TV/VCR When you play a VHS tape, or receive a broadcast on the TV/VCR/DVD tuner channel you are watching, the status shown below will appear when you press the DISPLAY button on the remote control.
T1061UM(p1-35).QX3 04.7.8 3:58 PM Page 24 SELECTING THE MTS SYSTEM TV/VCR TO SELECT MONO MODE Make sure ... • TV/VCR/DVD power must be turned on. You can change the selection to “MONO” if you want to listen to HIFI tapes in normal audio playback. 1) Press the SETUP button on the remote control. Press the Arrow button K or L to point to “USER’S SET UP”. Then press the ENTER button. 2) Press the Arrow button K or L to point to “VCR AUDIO”. 3) Press the ENTER button until [MONO] appears.
T1061UM(p1-35).QX3 04.7.8 3:58 PM Page 25 VIDEO CASSETTE This TV/VCR/DVD will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. PRECAUTIONS INSERTING A CASSETTE • Avoid moisture. Moisture condensation may occur Insert the cassette in the direction as shown. Push in gently, but continuously, on the center-back of the cassette until it is drawn into the TV/VCR/DVD.
T1061UM(p1-35).QX3 04.7.8 3:58 PM Page 26 PLAYBACK NORMAL PLAYBACK SLOW MOTION TV/VCR Make sure ... • TV/VCR/DVD power must be turned on. 1 Insert a prerecorded tape If the erase-protection tab has been removed, the TV/VCR/DVD will start playback automatically. 2 To begin playback TV/VCR Press the PAUSE button, then press the F.FWD g button to start the playback in slow motion. The TV/VCR/DVD mutes the sound during slow motion. Press the PLAY button to return to normal playback.
T1061UM(p1-35).QX3 04.7.8 3:58 PM Page 27 SPECIAL PLAYBACK Make sure ... • TV/VCR/DVD’s power must be turned on. • Insert a prerecorded tape. AUTO REPEAT PLAYBACK TV/VCR RENTAL PLAYBACK TV/VCR This function enables you to improve the picture quality when playing back worn cassettes such as rented tapes. 1 Select “USER’S SET UP” Press the SETUP button on the remote control. Press the Arrow button K or L to point to “USER’S SET UP”. Then press the ENTER button.
T1061UM(p1-35).QX3 04.7.8 3:58 PM Page 28 SEARCH Make sure ... • TV/VCR/DVD power must be turned on. • Insert a tape. TIME SEARCH TV/VCR ZERO RETURN TV/VCR This function allows you to search easily a specific point that you want to review by rewinding or fast forwarding. NOTE: Zero Return WILL NOT work on a blank tape or a blank portion of a tape. 1 Stop a tape at your desired point Rewind or fast forward the tape to the beginning point at which you want to review.
T1061UM(p1-35).QX3 04.7.8 3:58 PM Page 29 INDEX SEARCH 1 TV/VCR This feature provides a method of indexing the starting point so that it can be easily returned to in either fast forward or rewind mode. • The index mark will be made automatically when the RECORD button is pressed. It will also be marked at the starting point of Timer recording and OTR. • The index mark will not be recorded if the PAUSE button is pressed and released during recording.
T1061UM(p1-35).QX3 04.7.8 3:58 PM Page 30 RECORDING Make sure ... • TV/VCR/DVD power must be turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) NOTES: • This TV/VCR/DVD will ONLY record and view the same channel. • This TV/VCR/DVD cannot record the contents from the built-in DVD.
T1061UM(p1-35).QX3 04.7.8 3:58 PM Page 31 OTR (One Touch Recording) TV/VCR This function enables you to set a recording length simply by pressing the REC/OTR button on the TV/VCR/DVD. Make sure ... • TV/VCR/DVD power must be turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) NOTES: • You cannot start OTR with the remote control.
T1061UM(p1-35).QX3 04.7.8 3:58 PM Page 32 TIMER AUTOMATIC TIMER RECORDING 1 Select “TIMER PROGRAMMING” Press the SETUP button on the remote control. Confirm “TIMER PROGRAMMING” is pointed by pressing the Arrow button K, then press the ENTER button. • If you have not yet set the clock, “MANUAL CLOCK SET” appears. If so, follow steps [3] to [8] on pages 15, 16. Then set the timer recording. - TV/VCR SETUP - TV/VCR You may set the TV/VCR/DVD to start and end a recording while you are away.
T1061UM(p1-35).QX3 5 04.7.8 3:58 PM Set beginning hour Press the Arrow button K or L until the desired hour appears. (Example: “ 7, PM” for 7:30PM) Then press the Arrow button B. 6 Set beginning minute Press the Arrow button K or L until the desired minute appears. (Example: “30” for 7:30PM) Then press the Arrow button B. 7 Set end hour Press the Arrow button K or L until the desired hour appears. (Example: “8, PM” for 8:50PM) Then press the Arrow button B.
T1061UM(p1-35).QX3 04.7.8 3:58 PM Page 34 TO CHECK THE BEGIN/END TIME 3 1)Press the POWER button so that the Recording indicator goes off. 2)Press the SETUP button on the remote control. 3)Confirm “TIMER PROGRAMMING” is pointed. 4)Press the ENTER button. The details of programs appear on the TV screen. 5)Press the SETUP button on the remote control to return to TV mode. 4 TV/VCR • • • • • • Make sure the channel you want to record is properly set in advance.
T1061UM(p1-35).QX3 04.7.8 3:58 PM Page 35 ON SCREEN DISPLAY To check the Counter, Clock and Channel number on the TV screen, press the DISPLAY button on the remote control. Each time you press the DISPLAY button on the remote control, the TV screen will change as follows: When the Closed Caption mode is OFF: When the Closed Caption mode is ON: • Counter mode: After 5 seconds, only the counter • The On Screen Display disappears after 5 seconds.
T1061UM(P36-51).QX3 04.7.8 3:59 PM Page 36 DVD SECTION ABOUT THE DISCS PLAYABLE DISCS DISC TYPES The following discs can be played back on this TV/VCR/DVD. ¡DVD video ¡DVD-R/RW* ¡DVD+R/RW* ¡Audio CD ¡CD-R/RW* * Depending on the types or the writing method of the medium, some discs can not be played. [DVD] Data on a DVD is divided into sections called "titles" and then into subsections called "chapters", each of which is given a title or chapter number.
T1061UM(P36-51).QX3 04.7.8 3:59 PM Page 37 PLAYING A DISC BASIC PLAYBACK DVD-V GENERAL FEATURES CD DVD-V Getting started ¡Turn on the power of any other components, if nec- essary. 1 Press the POWER button. ¡The power will turn on. 2 Press the OPEN/CLOSE button to open disc loading tray. 3 Place the chosen disc in the tray, with the label facing up. DVD may contain menus to navigate the disc and access special features.
T1061UM(P36-51).QX3 04.7.8 3:59 PM Page 38 FAST FORWARD/REVERSE SEARCH RESUME DVD-V CD DVD-V 1 During playback, press the STOP button. 1 During playback, press and hold the SKIP (h / g) button for a few seconds. ¡Resume message will appear on the TV screen. ¡“ g 1” or “h 1” appears on the screen. 2 Press the PLAY button, playback will resume 2 To select another speed, repeat step [1] until from the point at which playback was stopped. ¡To cancel resume, press the STOP button twice.
T1061UM(P36-51).QX3 04.7.8 3:59 PM Page 39 SEARCH FUNCTION TRACK SEARCH TIME SEARCH CD DVD-V CD There are three ways to begin playback on an Audio CD at a specific track. 1 During playback, press the SEARCH MODE Using the Number buttons on the remote control 2 Within 30 seconds, enter a desired disc button three times (CD: twice) to display the Time Search on the TV screen. 1 Press the Number buttons to enter the time using the Number buttons on the remote control. desired Track number.
T1061UM(P36-51).QX3 04.7.8 3:59 PM Page 40 SPECIAL PLAYBACK FUNCTION REPEAT PROGRAM REPEAT is available only during playback. CD REPEAT TITLE / CHAPTER DVD-V 1 In stop mode, press the MODE button. ¡The PROGRAM screen will appear. To activate the repeat function, press the REPEAT button during playback. ¡The repeat mode changes as described below every time you press the button.
T1061UM(P36-51).QX3 04.7.8 3:59 PM Page 41 CHANGING THE SETTINGS SUBTITLE LANGUAGE CAMERA ANGLE DVD-V DVD-V The TV/VCR/DVD allows you to select a language for subtitles during DVD (if available) playback. Some DVD discs contain scenes which have been shot simultaneously from various angles. You can change the camera angle when the ( ) icon appears on the screen. 1 Press the SUBTITLE button during playback. 2 Press the SUBTITLE button repeatedly to select your desired subtitle language.
T1061UM(P36-51).QX3 04.7.8 3:59 PM Page 42 THE ON-SCREEN INFORMATION DVD-V CD You can check the information about the current disc by pressing the DISPLAY button on the remote control. For DVD-Vs For audio CDs 1 Press the DISPLAY button during playback 1 Press the DISPLAY button during playback to show current Chapter. to show the current Track. ¡The elapsed and remaining playing time of the current chapter will be displayed.
T1061UM(P36-51).QX3 04.7.8 3:59 PM Page 43 CHANGING THE DVD SETUP ITEMS LANGUAGE SETTING DVD-V Language options are not available with some discs. 1 Press the SETUP button twice in STOP mode so that the DVD SETUP menu appears. ¡ If the menu does not appear, press the PLAY button, the STOP button, then the SETUP button twice. SETUP QUICK CUSTOM INITIALIZE 2 Press the Arrow button L to select CUSTOM, then press the ENTER button. ¡CUSTOM mode will appear.
T1061UM(P36-51).QX3 04.7.8 3:59 PM Page 44 DISPLAY SETTING AUDIO SETTINGS DVD-V DVD-V You can change certain aspects of the DVD display screens and on-screen messages on the TV screen. Choose the appropriate Audio settings for your equipment as it only affects during the playback of DVD discs. 1 Press the SETUP button twice in STOP mode so that the DVD SETUP menu appears. ¡ If the menu does not appear, press the PLAY button, the STOP button, then the SETUP button twice.
T1061UM(P36-51).QX3 04.7.8 3:59 PM Page 45 CONTROL LEVELS PARENTAL CONTROL ¡ALL DVD-V All parental lock is cancelled. ¡Level 8 DVD software of any grade (adult/general/children) can be played back. Parental Control limits the disc viewing that exceed your settings (with a password or playback will stop). This feature allows you to prevent discs with objectionable material from being played by your children.
T1061UM(P36-51).QX3 04.7.8 3:59 PM Page 46 TROUBLESHOOTING GUIDE If the TV/VCR/DVD does not perform properly when operated as instructed in this Owner’s Manual, check the TV/VCR/DVD, consulting the following checklist. PROBLEM No power The TV/VCR/DVD does not respond to the remote control CORRECTIVE ACTION • Make sure the power plug is connected to an AC outlet. • Make sure the power is turned on. • Check if the power plug is connected to an AC outlet. • Check the batteries in the remote control.
T1061UM(P36-51).QX3 04.7.8 3:59 PM PROBLEM Picture OK, Sound Poor Timer recording is not possible Cannot go into Record mode Playback picture is partially noisy No picture but the audio is OK in playback No operation by infrared Remote Control Video or color fades in and out when making a copy of a video tape Distorted color appears on screen Page 47 CORRECTIVE ACTION • Try a new channel, if OK, then possible station trouble. • Check for local interference.
T1061UM(P36-51).QX3 04.7.8 3:59 PM Page 48 DVD Mode PROBLEM CORRECTIVE ACTION • Insert a correct video disc that plays on this TV/VCR/DVD. • Press the SELECT button on the remote control to select DVD mode. Then, try other DVD feature. • Insert the disc. Disc cannot be played • Clean the disc. • Place the disc correctly, with the label side up. • Cancel the parental lock or change the control level. • Connect the audio cables firmly. No sound • Turn the power of the audio component on.
T1061UM(P36-51).QX3 04.7.8 3:59 PM Page 49 MAINTENANCE CABINET CLEANING • Wipe the front panel and other exterior surfaces of • the TV/VCR/DVD with a soft cloth immersed in lukewarm water and wrung dry. Never use a solvent or alcohol. Do not spray insecticide liquid near the TV/VCR/DVD. Such chemicals may cause damage and discoloration to the exposed surfaces. 1. Please visit your local Audio/Video store and purchase a good quality VHS Video Head Cleaner. 2.
T1061UM(P36-51).QX3 04.7.8 3:59 PM Page 50 SPECIFICATIONS GENERAL SPECIFICATIONS TV/VCR CRT 20 inch in-line gun, 90˚ deflection tube Television system : NTSC-M Closed caption system :§15.119/FCC Video Heads : Rotary four-head Tape width : 1/2 inch Tape speed SP : 33.40mm/sec. LP : 16.67mm/sec. SLP : 11.12mm/sec.
T1061UM(ES).QX3 04.7.8 4:17 PM Page 51 INDICE ■ CONTROLES DE OPERACIÓN Y FUNCIONES . . . . . 51 PANEL FRONTAL DEL TELEVISOR/VIDEOGRABADORA/DVD . . . . . . . . . . . 51 MANDO A DISTANCIA . . . . . . . . . . . . . . . . . . . . . . . . . 51 VISTA POSTERIOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 ■ PREPARACIÓN PARA LA UTILIZACIÓN . . . . . . . . . . 52 CONEXIONES DE ANTENA/CABLE . . . . . . . . . . . . . . 52 CONEXIÓN A TOMAS DE ENTRADA EXTERNA. . . . 52 PARA INSERTAR LAS PILAS . . . . .
T1061UM(ES).QX3 04.7.8 4:17 PM Page 52 28. Botón SETUP Presione este botón para activar o salir del modo de menús de televisor o configuración de DVD. 29. Botón TITLE Para visualizar el menú de títulos. 30. Botón CLEAR Para cancelar ajustes. 31. Botón MODE Activa el modo de reproducción programada o el modo de reproducción aleatoria. 32. Botón SEARCH MODE Presione este botón para localizar un punto deseado. 33.
T1061UM(ES).QX3 04.7.8 4:17 PM Page 53 CONEXIÓN A TOMAS DE ENTRADA EXTERNA Cuando vea un programa grabado en otra fuente (videograbadora o videocámara), utilice las tomas de entrada de audio/ vídeo de la parte delantera del televisor/videograbadora/ DVD. Conecte las tomas de salida de audio/vídeo de otra fuente a las tomas AUDIO L/R y VIDEO de este televisor/ videograbadora/DVD. Luego, presione los botones CHANNEL K/L hasta que aparezca "AUX" en la pantalla.
T1061UM(ES).QX3 04.7.8 4:17 PM Page 54 AJUSTE DE CANAL SECCIÓN DE TV/VCR TV/VCR PREPARACIÓN PARA LA UTILIZACIÓN SELECCIÓN DE IDIOMA TV/VCR 1 Enchufe el cordón de alimentación del televisor/videograbadora/DVD Enchufe el cordón de alimentación del televisor/ videograbadora/DVD en una toma de CA estándar. NOTA: • Si aparecen algunas cifras en la esquina de la pantalla, pulse el botón POWER sin desenchufar el cordón de alimentación. Asegúrese de que ...
T1061UM(ES).QX3 04.7.8 4:17 PM Page 55 AJUSTE DEL RELOJ SECCIÓN DE DVD TV/VCR Cerciórese... • La alimentación del televisor/videograbadora/DVD deberá estar conectada. En el ejemplo de abajo, el reloj va a ajustarse así: FECHA: 6 de mayo de 2004 HORA: 5:40 PM 1) Pulse el botón SETUP en el mando a distancia. Pulse el botón K o L para indicar “AJUSTE RELOJ”. Luego, pulse el botón ENTER. 2) Pulse el botón K o L para indicar “AJUSTE MANUAL RELOJ”. Luego, pulse el botón ENTER.
T1061UM(P36-51).QX3 04.7.8 3:59 PM Page 51 Get it fixed, at your home or ours! Your Home For repair- in your home -of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters.
