User Guide

ManualsBrandsFUNAI ManualsOtherSREC427

Owner’s Manual

SREC427

IF YOU NEED ADDITIONAL ASSISTANCE FOR SET-UP OR OPERATING

AFTER READING OWNER’S MANUAL, PLEASE CALL TOLL FREE

1-800-605-8453.

Thank you for purchasing this product.

Please make sure to read this manual before using the product, and pay par-

ticular attention to the Safety Instructions enclosed within.

When you have finished reading this manual, store it in a safe place for easy

access in the future.

COLOR TV/VCR/DVD TRIPLE RECORDER COMBO

Before you use this unit, you need to complete connections.

Refer to “Connections” on pages 10-13.

To record a program easily, refer to “Easy DVD recording” on pages 46-47

after connections are completed.

(You CANNOT copy any copyright protected DVD disc with this unit.)

P Owner's Manual

(1EMN20100)

P Remote Control

(NE235UD)

P AA batteries x 2

SUPPLIED ACCESSORIES

This unit comes with the following accessories. Please confirm that all the accessories

are included.

NOTE

If any of accessories are missing, please contact your dealer.

INSTRUCCIONES EN ESPAÑOL INCLUDAS.

T2020UA_01-44 04.8.10 3:38 PM Page 1

Summary of content (88 pages)

PAGE 1
T2020UA_01-44 04.8.10 3:38 PM Page 1 COLOR TV/VCR/DVD TRIPLE RECORDER COMBO Owner’s Manual SREC427 SUPPLIED ACCESSORIES This unit comes with the following accessories. Please confirm that all the accessories are included. P Owner's Manual (1EMN20100) P Remote Control (NE235UD) P AA batteries x 2 NOTE If any of accessories are missing, please contact your dealer. Thank you for purchasing this product.
PAGE 2
T2020UA_01-44 04.8.10 3:38 PM Page 2 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
PAGE 3
T2020UA_01-44 04.8.10 3:38 PM Page 3 ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ELECTRIC SERVICE EQUIPMENT GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS NEC - NATIONAL ELECTRICAL CODE S2898A 13. Outdoor Antenna grounding - If an outside antenna or cable system is connected to the TV/VCR/DVD, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges.
PAGE 4
T2020UA_01-44 04.8.10 3:38 PM Page 4 PRECAUTIONS IMPORTANT COPYRIGHT INFORMATION Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
PAGE 5
04.8.10 3:38 PM Page 5 AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE • Do not handle the power cord with wet hands. • Do not pull on the power cord when disconnecting it from an AC wall outlet. Grasp it by the plug. • If, by accident, water is spilled on your unit, unplug the power cord immediately and take the unit to a Authorized Service Center for servicing. • Do not put your fingers or objects into the TV/VCR/DVD disc loading tray or the cassette compartment.
PAGE 6
T2020UA_01-44 04.8.10 3:38 PM Page 6 CONTENTS IMPORTANT SAFETY INSTRUCTIONS PRECAUTIONS . . . . . . . . . . . . . . . . . . . SYMBOLS USED IN THIS MANUAL . . . CONTENTS . . . . . . . . . . . . . . . . . . . . . . COMPONENT NAMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 .4 .5 .6 .7 Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Remote Control Unit . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 7
T2020UA_01-44 04.8.10 3:38 PM Page 7 COMPONENT NAMES Main Unit 1 3 4 5 2 13 6 7 8 9 10 11 12 01 Cassette compartment (VCR): Insert a tape here. 02 Disc tray (DVD): Place a disc on the tray when open. 03 S-VIDEO input jack (DVD only): Use to connect the S-Video output of external video components with an S-Video cable. 04 VIDEO input jack: Use to connect external video components with a standard video cable.
PAGE 8
T2020UA_01-44 04.8.10 3:38 PM Page 8 COMPONENT NAMES Remote Control Unit 15 MUTE button: Press to eliminate the sound temporarily. 16 CHANNEL K/L buttons: Press to change the chan- 14 15 1 2 16 3 17 18 4 19 5 20 21 6 7 8 22 9 25 10 27 11 program setting menu. 23 24 26 28 13 01 POWER button: Press to turn the unit on and off. If timer programmings have been set, press to place the unit in timer-standby mode. Press to cancel the timer standby mode, then turn the unit on.
PAGE 9
T2020UA_01-44 04.8.10 3:38 PM Page 9 Inserting Remote Control Batteries Slide the cover of the remote control unit down until the battery compartment appears. 2 Insert two AA size batteries, making sure that their polarities should match the symbols shown inside the battery casing. 3 Slide and close the cover of the remote control unit. COMPONENT NAMES 1 NOTE • Do not insert old and new batteries mixed together. • Do not insert different brands or types of batteries mixed together.
PAGE 10
T2020UA_01-44 04.8.10 3:38 PM Page 10 CONNECTIONS Connection of Main Unit Antenna Cable Signal or 1 Connect AUDIO OUT COAXIAL (Rear of main unit) 2 Plug in the AC power cord of this unit. Connection to Cable Box or Satellite Box (Cable box or Satellite box) IN OUT Cable Signal AUDIO OUT COAXIAL (Rear of main unit) Select this connection when you want to view or record a scrambled channel. With this connection, channels cannot be changed on the TV/VCR/DVD unit.
PAGE 11
T2020UA_01-44 04.8.10 3:38 PM Page 11 Connection to Audio System • Before changing the connections or installing the unit, all devices should be turned off. • Refer to each owner's manual for further information on other devices.
PAGE 12
T2020UA_01-44 04.8.10 3:38 PM Page 12 CONNECTIONS Digital Out Audio Setting Set the digital audio output. Choose the appropriate audio setting when connecting the unit to an external audio system (sold separately). NOTE: DVD & CD Audio Only Setup > Playback TV Mode Disc Menu Language Audio Language Original Subtitle Language • Only DVD and CD audio will be available to be amplified through the external audio system.
PAGE 13
T2020UA_01-44 04.8.10 3:38 PM Page 13 [B] Settings for Dolby gDigital (Default : Stream) Fast Forward with Audio (Default : OFF) Set to “ON” to hear the sound during playback in fast forward of x2. Original OFF ntrol udio PCM ON Dolby Digital PCM Stream OFF Setup > Playback TV Mode Parental Lock Disc Menu Language Audio Language Subtitle Language DVD 4:3 Letter Box All English Original OFF • Select a setting using K/L buttons, then press ENTER button.
PAGE 14
T2020UA_01-44 04.8.10 3:38 PM Page 14 OSD DISPLAY SETTING OSD Background Color (Default : 1 Green) POWER Set the OSD screen color. You can choose one from 1(Green), 2(Blue), and 3(Red). SETUP Setup > Display VCR DVD OSD Background Transparency 35% / / OSD Background Color / ENTER OSD Language 1 English Screen Saver 10 minutes Caption OFF V-CHIP Setup STOP C (DVD) STOP C (VCR) Setup > Display Press STOP C (DVD) or STOP C (VCR) button if you are playing a disc or tape.
PAGE 15
T2020UA_01-44 04.8.10 3:38 PM Page 15 OSD LANGUAGE SETTING You can select the language for on-screen display (OSD). POWER SETUP / / ENTER 1 Press POWER button to turn on the unit. 2 Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. 3 Select "SETUP" using s/B buttons, then press ENTER button. SETUP menu will appear. 4 Select "Display" using K/L/s/B buttons, then press ENTER button. Option window will appear.
PAGE 16
T2020UA_01-44 04.8.10 3:38 PM Page 16 CHANNEL SETTING It is recommended that you should preset channels in your area using "Auto Preset" in the Channel Preset of the SETUP menu. Auto Preset CHANNEL K / L / ENTER / / RETURN Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. Select "SETUP" using s/B buttons, then press ENTER button. SETUP menu will appear. 3 Select "Channel" using K/L/s/B buttons, then press ENTER button. Channel Preset menu will appear.
PAGE 17
T2020UA_01-44 04.8.10 3:38 PM Page 17 Add/Delete Function The channels you no longer receive or seldom watch can be deleted from the memory. You can also add channels into memory. from the channel memory. The next channel number will appear so that you can continue adding or deleting channels. 7 Press SETUP button to exit. Selecting TV Stereo or SAP SETUP / / / You can select stereo or SAP (Secondary Audio Program). "Stereo" has been selected as the default.
PAGE 18
T2020UA_01-44 04.8.10 3:38 PM Page 18 CLOCK SETTING Set the clock before you try timer recording. If a Public Broadcasting Station (PBS) is available in your area, follow Auto Clock Setting below. If not, follow Manual Clock Setting on page 19. 5 Select "Manual" using K/L buttons, then press ENTER button. Enter your PBS channel number using Number buttons or K/L buttons, then press ENTER button. Important You must know the local PBS station in your area.
PAGE 19
T2020UA_01-44 04.8.10 3:38 PM Page 19 Manual Clock Setting Setup > Clock VCR DVD Clock Setting Auto Clock Setting OFF Daylight Saving Time ON JAN / 12 / 2004 (MON) 09 : 24 AM SETUP / NOTE: / • Your clock setting will be lost if either there is a power failure or this unit has been unplugged for more than 3 seconds when you set the clock manually. ENTER 7 1 Clock menu will appear. The settings will be activated. Press SETUP button to display SETUP/DISC menu.
PAGE 20
T2020UA_01-44 04.8.10 3:38 PM Page 20 DAYLIGHT SAVING TIME When Daylight Saving Time is ON, the clock will automatically move forward one hour on the first Sunday in April and move back one hour on the last Sunday in October. SETUP / / / ENTER 1 Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. 2 Select "SETUP" using s/B buttons, then press ENTER button. SETUP menu will appear. 3 Select "Clock" using K/L/s/B buttons, then press ENTER button. Clock menu will appear.
PAGE 21
T2020UA_01-44 04.8.10 3:38 PM Page 21 SELECTING TV DISPLAY MODE You can select the TV display mode to your viewing preference for DVD viewing. 3 "4:3 Letter Box" has been selected as the default. Select "Playback" using K/L/s/B buttons, then press ENTER button. Playback menu will appear. 4 SETUP Select "TV Mode" using K/L buttons, then press ENTER button. Option window will appear.
PAGE 22
T2020UA_01-44 04.8.10 3:38 PM Page 22 OPERATING TV TV FUNCTIONS Watching TV Program Setting Sleep Timer SLEEP POWER Number CHANNEL K / L VOLUME X / Y 1 Press POWER button to turn on the unit. The sleep timer function automatically turns off the power in the specified time period. 2 Select the desired channel using CHANNEL K/L buttons or the Number buttons on the remote control. 1 Press SLEEP button. Sleep timer menu will appear.
PAGE 23
T2020UA_01-44 04.8.10 3:38 PM Page 23 Adjusting Picture The adjustments you can make are as follows: PICTURE / / BRIGHT - 1 Press PICTURE button. 2 Select the setting item using K/L buttons. + OPERATING TV / CONTRAST - NOTE: + Adjust using s/B buttons.
PAGE 24
T2020UA_01-44 04.8.10 3:38 PM Page 24 OPERATING TV TV FUNCTIONS Setting V-CHIP 4 Select "V-CHIP Setup" using K/L buttons, then press ENTER button. "ACCESS CODE" screen will appear. Number ACCESS CODE –––– SETUP / / / ENTER 5 The default access code is "0000". If you have not set a personal access code, enter "0000". V-CHIP enables parents to prevent their children from watching inappropriate material on TV.
PAGE 25
T2020UA_01-44 04.8.10 3:38 PM Page 25 • The sub ratings that are set to [BLOCK] appear next to the rating category in TV RATING menu. • When you turn "TV-Y" to [BLOCK] or [VIEW], all ratings will change to [BLOCK] or [VIEW] automatically. Setting TV Rating Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. Rating Category Explanations Select "SETUP" using s/B buttons, then press ENTER button. SETUP menu will appear.
PAGE 26
T2020UA_01-44 04.8.10 3:38 PM Page 26 OPERATING TV TV FUNCTIONS Setting V-CHIP Access Code 6 Select "CHANGE CODE" using K/L buttons, then press ENTER button. - V-CHIP SET UP - Number TV RATING MPAA RATING CHANGE CODE SETUP / / / The following screen will appear. ENTER NEW CODE –––– To change the access code, follow the procedure below. 1 –––– Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear.
PAGE 27
T2020UA_01-44 04.8.10 3:38 PM Page 27 Selecting Closed Caption SETUP / / / You may view specially labeled (cc) TV programs, movies, news, prerecorded tapes, etc. with either dialogue captions or text added to the display. 1 Press SETUP button to display SETUP/DISC menu. OPERATING TV ENTER 2 Select "SETUP" using s/B buttons, then press ENTER button. SETUP menu will appear. 3 Select "Display" using K/L/s/B buttons, then press ENTER button. Display menu will appear.
PAGE 28
T2020UA_01-44 04.8.10 3:38 PM Page 28 OPERATING VCR VCR FUNCTIONS Playback Recording VCR Normal Recording VCR POWER Before recording, make sure: CHANNEL K / L • You can ONLY watch the same TV program that is being recorded. • Stereo or SAP is selected (page 17). / / / • The desired channel should be selected by pressing the Number buttons on the remote control or CHANNEL K/L buttons on the main unit. • A tape with a record tab should be loaded inside the unit.
PAGE 29
04.8.10 7:20 PM Page 29 One-Touch Timer Recording Time Search VCR This feature allows you to set the recording length simply by pressing I RECORD (VCR) button on the main unit. C STOP / A EJECT (VCR) This feature allows you to go to a specific point on a tape by entering the exact amount of time you wish to skip. I RECORD (VCR) / During normal recording, press I RECORD (VCR) button on the main unit to begin one-touch timer recording.
PAGE 30
T2020UA_01-44 04.8.10 3:38 PM Page 30 OPERATING VCR VCR FUNCTIONS • When you want to enjoy the sound in monaural, select "MONO".
PAGE 31
T2020UA_01-44 04.8.10 3:38 PM Page 31 OPERATING DVD RECORDER PLAYING About DVD Playing This unit is compatible to play the following discs. To play a DVD, make sure that it meets the requirements for Region Codes and Color Systems as described below. Discs with the following logos can be played on the unit. Other Disc types are not guaranteed to play. Color systems Disc This unit has been designed to play DVD discs with Region One (1).
PAGE 32
T2020UA_01-44 04.8.10 3:38 PM Page 32 OPERATING DVD RECORDER PLAYING Language Setting Audio Language (Default : Original) Set the Audio language. NOTE: • Only the languages supported by the disc can be selected.
PAGE 33
T2020UA_01-44 04.8.10 3:38 PM Page 33 Basic Playback VR mode: Playback Original 1 2 3 JAN/1 1:00AM JAN/1 2:00AM 1 DVD-R DVD-RW (Video) DVD-RW (VR) JAN/1 12:00AM 4 POWER JAN/1 3:00AM 5 JAN/1 4:00AM JAN/1 12:00AM / / 1 2 3 JAN/1 1:00AM JAN/1 2:00AM 1 DISC MENU TOP MENU / 4 JAN/1 3:00AM 5 JAN/1 4:00AM ENTER STOP C (DVD) 1 Press POWER button. 2 Press A OPEN/CLOSE button on the main unit to open the disc tray. NOTE: • Press the TOP MENU button to exit the menu.
PAGE 34
T2020UA_01-44 04.8.10 3:38 PM Page 34 OPERATING DVD RECORDER PLAYING DVD-V CD MP3 POWER TOP MENU ENTER 1 PLAY B (DVD) RETURN STOP C (DVD) In stop mode, press TOP MENU button to bring up the MP3 menu. STOP C (DVD) List of MP3 Files DISC NAME 1 Press POWER button. 2 Press A OPEN/CLOSE button on the main unit to open the disc tray. FOLDER NAME 1 FOLDER NAME 2 FOLDER NAME 3 FOLDER NAME 4 FOLDER NAME 5 FOLDER NAME 6 1 FILE NAME 1 2 FILE NAME 2 The disc tray will open.
PAGE 35
Page 35 Playback with Disc Menu Playback with Title Menu DVD-V A DVD disc contains a disc menu that describes the contents or allows you to customize the playback. For example, the menu may offer choices for subtitle languages, special features, or chapter selection. DVD-V Some DVDs have a title menu, which lists the titles available on them. It helps you to start playback at a specific title.
PAGE 36
T2020UA_01-44 04.8.10 3:38 PM Page 36 OPERATING DVD RECORDER PLAYING Fast Forward / Fast Reverse Special Playback DVD-V DVD-R DVD-RW (Video) DVD-RW (VR) CD MP3 Resume DVD-V DVD-R DVD-RW (Video) CD MP3 DVD-RW (VR) PLAY B (DVD) E D You can resume play from where you stopped playing the disc last. 1 NOTE: • For MP3 files, playback will resume from the beginning of the track at which playback was stopped.
PAGE 37
04.8.10 3:38 PM Page 37 Step by Step Zoom DVD-V DVD-R DVD-RW (Video) DVD-RW (VR) DVD-V DVD-R DVD-RW (Video) DVD-RW (VR) DISPLAY CHANNEL K / L / PLAY B (DVD) During playback, press PAUSE F button. / ENTER PAUSE F 1 / 1 Playback will pause and sound will be muted. During playback, press DISPLAY button repeatedly until the DVD status display menu appears. 1 2 DISC 1 1:23:45 DVD-Video Select icon using s/B buttons, then press ENTER button.
PAGE 38
T2020UA_01-44 04.8.10 3:38 PM Page 38 OPERATING DVD RECORDER PLAYING Setting Marker Search DVD-V DVD-R DVD-RW (Video) DVD-RW (VR) CD DVD-V DVD-R DVD-RW (Video) DVD-RW (VR) Title/Chapter Search This feature allows you to assign a specific point on a disc to be returned to later. DISPLAY DISPLAY CHANNEL K / L Number / CLEAR ENTER Using CHANNEL KL buttons 1 During playback, press DISPLAY button repeatedly until the DVD status display menu appears.
PAGE 39
T2020UA_01-44 04.8.10 3:38 PM Page 39 Track Search Time Search CD DVD-V DVD-R DVD-RW (Video) DVD-RW (VR) CD MP3 DISPLAY DISPLAY CHANNEL K / L Number / / / / ENTER / / ENTER Using CHANNEL KL buttons During playback, press CHANNEL K button to skip the current track and move to the next. 1 The track will move forward one at a time. During playback, press DISPLAY button repeatedly until the DVD status display menu appears.
PAGE 40
T2020UA_01-44 04.8.10 3:38 PM Page 40 OPERATING DVD RECORDER PLAYING Repeat/Random/Program Play Track: CD, MP3 only Repeat Play The current track will be played repeatedly. Group: MP3 only DVD-V DVD-R DVD-RW (Video) CD MP3 DVD-RW (VR) The current group will be played repeatedly. NOTE: • You cannot select "Group" during the random playback of MP3 files. DISPLAY Random Play CD / / / MP3 You can play tracks on a disc randomly instead of playing it in the recorded sequence.
PAGE 41
04.8.10 3:38 PM Page 41 Program Play Selecting AUDIO / VIDEO Menu CD You can program tracks on a disc to be played in your desired order. You can select an audio or video format, as you prefer depending on the contents of the disc you are playing. Switching Audio Soundtrack NOTE: • You can make program up to 50 tracks. DVD-V DVD-RW (VR) When playing a DVD-Video disc recorded with two or more soundtracks (mostly in different languages), you can switch between them anytime during playback.
PAGE 42
T2020UA_01-44 04.8.10 3:38 PM Page 42 OPERATING DVD RECORDER PLAYING 3 Select a desired audio soundtrack using K/L buttons, then press ENTER button. Audio soundtrack will switch. CD When playing Audio CDs or MP3 files you can switch between stereo, the left channel only or the right channel only. DISPLAY You can switch to main (L), sub audio (R) or a mix of both (L/R). In this case, follow the step [4].
PAGE 43
T2020UA_01-44 04.8.10 3:38 PM Page 43 Switching Subtitles Switching Camera Angles DVD-V DVD-RW (VR) DVD-V Many DVD Video discs have subtitles in one or more languages. The case usually tells you which subtitle languages are available. You can switch subtitle languages anytime during playback. DISPLAY • Some discs allow you to change the subtitle only from the disc's menu. Press TOP MENU button or DISC MENU button to display the disc's menu.
PAGE 44
T2020UA_01-44 04.8.10 3:38 PM Page 44 OPERATING DVD RECORDER PLAYING Reducing Block Noise Virtual Surround Setting DVD-V DVD-R DVD-RW (Video) DVD-RW (VR) This function reduces noise in the playback picture. DVD-V DVD-R DVD-RW (Video) DVD-RW (VR) Switching to virtual surround setting allows you to enjoy DVD disc with a surround effect. DISPLAY DISPLAY / / / / ENTER / / ENTER 1 During playback, press DISPLAY button repeatedly until the DVD status display menu appears.
PAGE 45
T2020UA_45-LAST 04.8.10 3:41 PM Page 45 GUIDE TO DISPLAYS ON SCREEN MENU This unit uses the following types of display for most operations. SETUP/DISC/CD menu, Title List, and DISPLAY, which allows you to change the playing status of disc during play. SETUP/DISC/CD menu "DISC" can be only selected when a DVD-R/RW disc is inserted into the unit. When a prerecorded DVD Video disc, a new DVD-R disc or the finalized DVD-R disc is inserted into the unit, you cannot select "DISC".
PAGE 46
T2020UA_45-LAST 04.8.10 3:41 PM Page 46 OPERATING DVD RECORDER EASY DVD RECORDING The following will help you to understand easily how to record to DVD discs. NOTE: • Make sure that you have completed connections and batteries should be inserted in the remote control. Step 1: Choose a disc type Step 2: Insert a blank disc There are several types of DVD disc recordable to choose from. Choose an applicable type by "DVD disc types" on this page. This unit can record on the following type of discs only.
PAGE 47
Page 47 Step 4: Select the desired channel Step 5: Press DVD RECORD button Step 6: Stop the Recording 58% Writing to Disc DISC NOTE: CH 1 • This operation may take a few minutes to complete. DISC I Playing the recorded contents You can select the title you want to play from a displayed menu and immediately start to play. Recorded contents are very accessible on a disc, the procedure is really simple as you choose a title on a chapter from the menu screen. Start Rec. Title 1 Stop/Start Stop Rec.
PAGE 48
T2020UA_45-LAST 04.8.10 3:41 PM Page 48 OPERATING DVD RECORDER RECORDING About DVD Recording This unit can record to DVD-R and DVD-RW discs. When recording, you will need to select a recording format between Video mode and VR mode depending on the disc format.The disc format for DVD-R is always "Video format," so a recording format will be "Video mode".
PAGE 49
Page 49 Restrictions Formatting You cannot record copy-protected video using this unit. Copy-protected video includes DVD-Video discs and some satellite broadcasts. If copy-protected material is encountered during a recording, the unit will pause or stop automatically and an error message will be displayed on-screen. "Copy-once only" video can be recorded only using a DVD-RW disc in VR mode with CPRM (see below).
PAGE 50
T2020UA_45-LAST 04.8.10 3:41 PM Page 50 OPERATING DVD RECORDER RECORDING 5 Reformatting Select "Video mode" or "VR mode" using K/L buttons, then press ENTER button. The recording mode will be set. 6 Select "Auto Chapter" using K/L buttons, then press ENTER button. Option window will appear.
PAGE 51
Page 51 Select "Yes" using s/B buttons, then press ENTER button. Basic Recording Recording TV Programs Formatting will start. DVD-R DVD-RW (Video) DVD-RW (VR) NOTE: Follow the steps below to record TV programs. • Select "No" to cancel formatting. CHANNEL K / L Number 58% Formatting / 6 Formatting is complete. REC SPEED DVD RECORD PAUSE F 100% will be indicated. 1 • This operation may take a few minutes to complete. Turn on the unit and load a recordable disc.
PAGE 52
T2020UA_45-LAST 04.8.10 3:41 PM Page 52 OPERATING DVD RECORDER RECORDING 4 Checking the recording picture quality Select a desired channel to record using CHANNEL K/L buttons or Number buttons. DVD-R DVD-RW (Video) DVD-RW (VR) You can confirm the recording speed you have selected before recording to a DVD disc. CH 1 5 Press DVD RECORD button to start recording. / NOTE: • Recording starts immediately and continues until the disc is full or you stop recording.
PAGE 53
T2020UA_45-LAST 04.8.10 3:41 PM Page 53 One-Touch Timer Recording DVD-R DVD-RW (Video) DVD-RW (VR) This is a simple way to set the recording time in blocks of 30 minutes. Check that the disc you are recording onto has enough space for the time you set. DISC I 0:30 CHANNEL K / L 8:00 7:30 When the unit reaches the specified time, it will turn off automatically.
PAGE 54
T2020UA_45-LAST 04.8.10 3:41 PM Page 54 OPERATING DVD RECORDER RECORDING Finalizing Discs SETUP DVD-R DVD-RW (Video) DVD-RW (VR) You must "Finalize" all recorded discs before they can be played on other DVD players. Without finalization, Video mode discs cannot be played back on other DVD players, and VR mode discs cannot be played back on other VR compatible players. / / / ENTER STOP C (DVD) 1 Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear.
PAGE 55
T2020UA_45-LAST 04.8.10 3:41 PM Page 55 Protecting Discs DVD-RW (VR) To prevent accidental recording, editing or erasing the titles, you can protect them. TO CANCEL THE DISC PROTECT : • When you insert a disc protected with this unit, “Disc Protect ON ➔ OFF” will appear instead of “OFF ➔ ON”. Disc Edit Format Finalize Yes SETUP / / / ENTER 1 Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. 2 Select "DISC" using s/B buttons, then press ENTER button.
PAGE 56
T2020UA_45-LAST 04.8.10 3:41 PM Page 56 OPERATING DVD RECORDER RECORDING Connecting to External Video Products Recording from External Video Products DVD-R DVD-RW (Video) DVD-RW (VR) Connections Connect the external video products properly to the unit by using input jacks on the front of this unit. Use S-Video or video cable, and an audio cable for this connection. OUTPUT S- VIDEO CHANNEL K / L Other devices (ex.VCR camcorder etc.
PAGE 57
T2020UA_45-LAST 04.8.10 3:41 PM Page 57 DUBBING DVD-R DVD-RW (Video) DVD-RW (VR) VCR You can copy a DVD disc to a videotape or copy a videotape to a DVD disc. This function will be possible only if the DVD disc or the tape is not copy protected. Before starting this function, prepare for the recording on the DVD-R/RW disc or the videotape. Refer to pages 48-55, 28-30. OPERATING DVD RECORDER NOTE: Load Recording Media • Insert a DVD disc or videotape with the available recording space.
PAGE 58
T2020UA_45-LAST 04.8.10 3:41 PM Page 58 OPERATING DVD RECORDER TIMER RECORDING Timer Recording 6 DVD-R DVD-RW (Video) DVD-RW (VR) VCR Enter the date using K/L buttons, then press B button. You can program up to 7 programs 1 year in advance. Daily or weekly program recordings are also available. Setup > Recording > Timer Programming JAN / 1/ 2004 (THU) 12 : 00 PM DVD Date Start End CH VCR Speed JAN / 01 - - : - -AM - - : - -AM CH8 DVD ----- e.g.
PAGE 59
T2020UA_45-LAST 04.8.10 3:41 PM Page 59 10 Select a recording speed using K/L buttons. Checking, canceling, or correcting the timer programming information Setup > Recording > Timer Programming JAN / 1/ 2004 (THU) 12 : 00 PM DVD Date Start End CH VCR Speed JAN/01 10:00PM 10:30PM CH8 DVD 1H --- POWER / / / ENTER 11 Press ENTER button when all information required is entered. Your program setting will be entered. • To set another program, repeat steps [5] to [11]. 1 Press POWER button.
PAGE 60
T2020UA_45-LAST 04.8.10 3:41 PM Page 60 OPERATING DVD RECORDER TIMER RECORDING Suggestions for Timer Recording • If there is a power failure or this unit has been unplugged for more than 3 seconds, the clock setting and all timer settings will be lost. • If a disc is not on the tray, timer recording cannot be performed. Please insert a recordable disc. • If a tape with a record tab is not in the cassette compartment, timer recording cannot be performed. Please insert a recordable tape.
PAGE 61
T2020UA_45-LAST 04.8.10 3:41 PM Page 61 EDITING DISCS About Disc Editing Editing in Video Mode Title List You can edit the following items for discs in Video mode. Be sure that once you edit titles, they will not remain as recorded originally. Title list allows you to check the titles recorded on the disc easily. You can choose a title to edit from this screen and easily edit the titles as you prefer.
PAGE 62
T2020UA_45-LAST 04.8.10 3:41 PM Page 62 OPERATING DVD RECORDER EDITING DISCS Editing Discs in Video Mode 4 Deleting Titles Option window will appear. DVD-R DVD-RW (Video) Caution: You can delete titles that you do not need anymore. The titles once deleted cannot be recovered to the disc. When the last title in the title list in Video mode is deleted, the disc space to record will be increased. For DVD-R disc, the disc space to record will not be changed.
PAGE 63
04.8.10 3:41 PM Page 63 Naming Titles Setting Chapter Markers DVD-R DVD-RW (Video) You can name the titles and change the names from this menu. The title names will be displayed on a Title List. DVD-RW (Video) You can put chapter markers in each title. Once a chapter is marked, you can use it for the chapter search. You can set chapter markers at a specified time you selected for titles with more than 5 minutes. SETUP / • You cannot select a time for putting markers beyond a length of a title.
PAGE 64
T2020UA_45-LAST 04.8.10 3:41 PM Page 64 OPERATING DVD RECORDER EDITING DISCS Editing DVD-RW Discs in VR Mode (Original) 4 Deleting Titles Select a desired title using K/L/s/B buttons, then press ENTER button. Original menu will appear. DVD-RW (VR) Disc > Edit > Original 1 When a title is deleted from an original list in VR mode, the disc space to record will be increased. Caution: Be advised that the titles once deleted cannot be brought back to the disc.
PAGE 65
T2020UA_45-LAST 04.8.10 3:41 PM Page 65 Deleting Parts of Titles Naming Titles DVD-RW (VR) DVD-RW (VR) You can delete part of a title so that the disc space to record will increase. You can name the titles and change the names from this menu. Caution: Be advised that the parts once deleted cannot be recovered. The title names will be displayed on a Title List. SETUP SETUP / / / / ENTER ENTER Follow the steps [1] to [4] on page 64 to display the Original menu.
PAGE 66
T2020UA_45-LAST 04.8.10 3:41 PM Page 66 OPERATING DVD RECORDER EDITING DISCS Setting Chapter Markers Setting Pictures for Thumbnails DVD-RW (VR) You can put chapter markers in each title. Once a chapter is marked, you can use it for chapter search. You can put a chapter marker anywhere you want. DVD-RW (VR) You can set a picture to each title for a thumbnail. It helps you to remember the contents of the title you are playing. The beginning picture has been selected as the default.
PAGE 67
04.8.10 3:41 PM Page 67 Releasing Title Protect DVD-RW (VR) To prevent accidental editing or erasing the titles, you can protect them from the original menu. DVD-RW (VR) You can release the title protection once you protected. SETUP SETUP / / / / ENTER / / ENTER Follow the steps [1] to [4] on page 64 to display the Original menu. Follow the steps [1] to [3] on page 64 to display the Original list. 1 1 Select "Protect OFF ➔ ON" using K/L buttons, then press ENTER button.
PAGE 68
T2020UA_45-LAST 04.8.10 3:41 PM Page 68 OPERATING DVD RECORDER EDITING DISCS Editing DVD-RW Discs in VR Mode (Playlist) 4 Deleting Titles Select a desired title using K/L/s/B buttons, then press ENTER button. Playlist menu will appear. DVD-RW (VR) Disc > Edit > Playlist 1 In VR mode, even when a title is deleted from a Playlist, the original title will remain in an Original list. The disc space to record will not increase.
PAGE 69
04.8.10 3:41 PM Page 69 Deleting Parts of Titles Naming Titles DVD-RW (VR) DVD-RW (VR) Important You can delete a specific part of a title. Even when a title is deleted from the Playlist, the original title will remain. The disc space to record will not be increased. You can name the titles and change the names from this menu. The title names will be displayed on a Title List. SETUP SETUP / / / / / / ENTER ENTER Follow the steps [1] to [4] on page 68 to display the Playlist menu.
PAGE 70
T2020UA_45-LAST 04.8.10 3:41 PM Page 70 OPERATING DVD RECORDER EDITING DISCS Setting Chapter Markers Setting Pictures for Thumbnails DVD-RW (VR) You can put chapter markers in each title. Once a chapter is marked, you can use it for the chapter search. You can put a chapter marker anywhere you want. DVD-RW (VR) You can set a picture to each title for a thumbnail. It helps you to remember the contents of the title you are playing. The beginning picture has been selected as the default.
PAGE 71
T2020UA_45-LAST 04.8.10 3:41 PM Page 71 Adding Titles to Playlist Deleting Playlist DVD-RW (VR) You can add or delete a title in the playlist as you prefer. You can add titles to a Playlist up to 99. DVD-RW (VR) A Playlist can be deleted if no longer needed. SETUP / / / / / / ENTER ENTER Follow the steps [1] to [3] on page 68 to display the Playlist. 1 Select "Add New Title" using K/L/s/B buttons, then press ENTER button. Option window will appear.
PAGE 72
T2020UA_45-LAST 04.8.10 3:41 PM Page 72 OPERATING DVD RECORDER PARENTAL LOCK LEVEL SETTING Some DVD-Video discs feature a Parental Lock level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc will playback. This feature prevents your children from viewing inappropriate material.
PAGE 73
T2020UA_45-LAST 04.8.10 3:41 PM Page 73 CHANGING SETUP MENU SETUP MENU LIST The following table shows the contents you can set, including the default settings. Refer to the following table for useful operation. 1.Language setting Disc Menu Page 32 Language Contents English French Spanish Set the language for disc menu. Audio Language Original English French Set the language for audio. Subtitle Language OFF English French Set the language for subtitle. 2.
PAGE 74
T2020UA_45-LAST 04.8.10 3:41 PM Page 74 OTHERS TROUBLESHOOTING Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple corrections may solve the problem and restore the proper operation. Symptom Remedy Power The power does not turn on. • Check that the AC power cord is connected securely. There is no picture. • Re-connect the connecting cord securely. • The connecting cords are damaged. • The Setup Display appears.
PAGE 75
Page 75 Symptom Playback The disc does not play. Remedy • No disc is inserted. • A blank disc is inserted. • No cassette tape is inserted. • The disc is upside down. Insert the disc with the labeled side facing up. • The disc is not correctly inserted. • The unit cannot play certain discs (such as a CD-ROM) (page 31). • The region code on the DVD VIDEO does not match the unit (page 31). • Moisture has condensed inside the unit.
PAGE 76
T2020UA_45-LAST 04.8.10 3:41 PM Page 76 OTHERS TROUBLESHOOTING Symptom Remedy Remote control The remote control does not function. • Batteries are weak. • There are obstacles between the remote control unit and the main unit. • The remote control unit is far from the main unit. • There are no batteries in the remote control unit. • The remote control is not pointed at the remote sensor on the unit. • Check if a cassette tape is in this unit. Others The unit does not operate properly.
PAGE 77
Page 77 Error message Cause Solution Disc Error --- Please eject the disc. --Playback feature may not be available on this Disc. Unplayable disc is inserted in the DVD recorder. Insert the standardized disc which bear the marks on page 31. Region Error --- Please eject the disc. --Playback is not authorized in your region. Playback is not authorized because the region code of the DVD video disc you inserted is different. Insert the DVD-Video disc with region codes 1 or ALL.
PAGE 78
T2020UA_45-LAST 04.8.10 3:41 PM Page 78 OTHERS MAINTENANCE CLEANING DISCS • When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out. Do not wipe in a circular motion. • Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analogue records.
PAGE 79
T2020UA_45-LAST 04.8.10 3:41 PM Page 79 GLOSSARY Analog audio Dolby Digital Regions code An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also "Digital audio". The system to compress digital sound developed by Dolby Laboratories. It offers you sound of stereo(2ch) or multi-channel audio (up to 6 channels (5.1ch)).
PAGE 80
T2020UA_45-LAST 04.8.10 3:41 PM Page 80 OTHERS SPECIFICATIONS GENERAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS Sound output: 27 inch in-line gun, 90˚ deflection tube Television system : NTSC-M Closed caption system :§15.119/FCC Video Heads : Rotary four-head Tape width : 1/2 inch Tape speed SP : 33.40mm/sec. LP : 16.67mm/sec. (playback only) SLP : 11.12mm/sec.
PAGE 81
T2020UA_45-LAST 04.8.
PAGE 82
T2020UA_45-LAST 04.8.10 3:41 PM Page 82 ESPAÑOL CONEXIONES Conexión de la Unidad Principal Conexión al Sistema de Audio • Antes de cambiar las conexiones o instalar la unidad, todos los dispositivos deben estar apagados. Antena Señal de Cable • Lea los manuales de usuario del resto de dispositivos para obtener más información.
PAGE 83
T2020UA_45-LAST 04.8.10 3:41 PM Page 83 AJUSTE DEL IDIOMA DE LOS OSD Puede seleccionar el idioma de los menús en pantalla (OSD). 4 POWER Seleccione "Display" utilizando los botones K/L/s/B, después pulse el botón ENTER. Aparecerá la ventana de opciones. 5 Seleccione "OSD Language" utilizando los botones K/L, después pulse el botón ENTER. NOTA: SETUP • El idioma por defecto de los OSD es el inglés. / / / 6 ENTER 1 Pulse el botón POWER para encender la unidad.
PAGE 84
T2020UA_45-LAST 04.8.10 3:41 PM Page 84 ESPAÑOL FUNCIONES DE TELEVISIÓN Visualización de un programa de televisión 2 Si la unidad TV/VCR/DVD está conectada a un dispositivo de cable o de satélite, el TV/VCR/DVD deberá encontrarse en el canal 3 o 4 y, en tal caso, el canal que desee visualizar deberá seleccionarlo desde el dispositivo de cable o del satélite. POWER Numéricos CHANNEL K / L VOLUME X / Y 1 Pulse el botón POWER para encender la unidad.
PAGE 85
T2020UA_45-LAST 04.8.10 3:41 PM Page 85 FUNCIONES DE DVD Reproducción Modo de VR: DVD-V DVD-R DVD-RW (Video) DVD-RW (VR) CD MP3 Original 1 2 1 ENE/1 12:00AM ENE/1 1:00AM 4 POWER ENE/1 3:00AM 3 ENE/1 2:00AM 5 ENE/1 4:00AM Botón DISC MENU Playlist ENE/1 12:00AM / / 1 2 1 DISC MENU TOP MENU / ENE/1 1:00AM 4 ENE/1 3:00AM 3 ENE/1 2:00AM 5 ENE/1 4:00AM ENTER STOP C (DVD) MP3: 1 Pulse el botón POWER.
PAGE 86
T2020UA_45-LAST 04.8.10 3:41 PM Page 86 ESPAÑOL GRABACIÓN FÁCIL DE DVD Lo que sigue a continuación de ayudará a comprender fácilmente cómo grabar discos DVD. NOTA • Asegúrese de haber completado las conexiones y de haber colocado pilas en el mando a distancia. Paso 1: Escoja el tipo de disco Paso 2: Introduzca un disco en blanco Existen varios tipos de discos de DVD grabables entre los que escoger. Escoja el tipo seleccionado de entre los “Tipos de disco DVD” de esta página.
PAGE 87
T2020UA_45-LAST 04.8.10 3:41 PM Page 87 Paso 4: Seleccione el canal deseado Paso 5: Pulse el botón DVD RECORD Paso 6: Detenga la Grabación 58% Escrit de datos DISC NOTA: CH 1 • Esta operación pude llevarle varios minutos. DISC I Reproducción de los contenidos grabados Comenzar la Grabación. Título 1 Detener / Comenzar Detener la Grabación. Título 2 ¿Qué son los títulos y los capítulos? Los contenidos del disco DVD se dividen normalmente en títulos.
PAGE 88
T2020UA_45-LAST 04.8.10 3:41 PM Page 88 Get it fixed, at your home or ours! Your Home For repair- in your home -of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters.