Operation Manual
4
EN
OPERATING CONTROLS AND FUNCTIONS
CONTROL PANEL
1. SETUP
Press to display the menu on the TV screen.
2. VOL. +/– (control panel) / +/– (vol.) (remote control)
Press to control the volume level.
VOL. + (control panel)
Same function as ENTER (remote control).
VOL. – (control panel)
Same function as BACK (remote control).
3. PROG. +/– (control panel)
Press to select item you want to adjust in the picture control
mode.
Press to select the setting mode from the menu on the TV
screen.
Press to go to the next page or the previous page of Teletext.
PROG. +/– (control panel) / / (prog.) (remote
control)
Press to select memorised channel or other modes.
4. INPUT SELECT
Press to select TV or external input mode.
5. STANDBY-ON
Press to turn the TV ON or OFF (standby).
6. STANDBY/POWER indicator
Lights up in green when power is on.
Lights up in red when power is in standby mode.
7. 0-9 number buttons
Press two digits to directly access the desired channel.
Remember to press “0” before a single digit channel.
8. (mute)
Press to mute the sound of the TV programme (Volume
level display turns LIGHT RED from LIGHT WHITE).
Press this button again or press VOL. +/– on the control
panel or +/– (vol.) on the remote control to restore sound.
9. PROG RETURN
Press to go back to the previously viewed channel. For
example, pressing this button once will change channel
display from P03 (present channel) to P10 (previously
viewed channel) and pressing it again will return from P10
to P03.
10. SOUND SELECT
Press to change sound modes.
11. SLEEP
Press to set the Sleep Timer.
REMOTE CONTROL
12. DISPLAY
Press to display the channel number or input source on the
TV screen. If you press it again, the display will disappear.
13. COLOR SYSTEM
Press to select the colour input signal from the tuner or
external devices.
14. (hold)
Press to hold the current page of Teletext.
15. RED/GREEN/YELLOW/BLUE
Press to directly select the page numbers of Teletext shown
at the bottom of the TV screen.
16. (index)
Press to go back to the start page of Teletext.
17. REVEAL
Press to call up the hidden information of Teletext.
18. SUBCODE
Press to select subpages of Teletext.
19. EXPAND
Press to enlarge fonts of Teletext.
20. (text)
Press to switch Teletext on or off, or transparent mode.
21. Cursor K / L / s / B buttons
Press to select the setting mode from the menu on the TV
screen.
Press to select item you want to adjust in the picture control
mode.
Press to go to the next page or the previous page of Teletext.
22. ENTER
Press to determine the setting mode from the menu on the
TV screen.
Press to select or adjust from a particular menu
(for example: Language Selection, Channel Presetting, or
Picture Adjustment).
23. BACK
Press to return to the previously displayed menu.
24. SCREEN MODE
Press to select aspect ratios available for the screen.
25. PIP
Press to display the “PIP” menu on the TV screen.
(See “PIP (Picture In Picture)”.)
26. Infrared sensor window
Receives the infrared rays transmitted from the remote
control.
Installing the Batteries
1) Open the battery compartment cover.
2) Insert “R6” penlight batteries into battery compartment in the
direction as indicated by the polarity (+/–) markings. Batteries
installed with incorrect polarity may damage the remote unit.
3) Close the cover.
4) Push the cover on its top side until it clicks in order to fit the
cover completely to the compartment.
POWERSTANDBY
626
STANDBY-ON
SETUP
VOL. PROG.
INPUT
SELECT
–+– +
POWERSTANDBY
12 345
SLEEP
PIP
SCREEN
MODE
SOUND
SELECT
INPUT
SELECT
DISPLAY
SETUP
BACK
PROG RETURN
RED
REVEAL
COLOR
SYSTEM
EXPAND SUB CODE
GREEN YELLOW
ENTER
+
<
<
-
BLUE
STANDBY-ON
123
456
789
0
4
5
1
21
2
13
20
17
8
7
11
2
4
1
0
2
2
3
1
8
1
9
1
4
1
6
1
5
9
1
2
23
2
5
A73F0EP_EN.book Page 4 Wednesday, September 12, 2007 10:48 AM