DVD Recorder User Manual

68
EN
xxxx
Changing the Setup menu
Tour of the Setup menu
Note
• If you change the settings in the Setup menu, the information of contents stays on even after the power is
switched off or the disc tray is opened or closed.
• An item which is not currently available is grayed out in Setup menus.
The following table shows the items which you can change the setting and their default settings.
Refer to the following table for your convenience.
Setup Items (highlight is the default) Contents
1.Language setting
Pages 69-70
Disc Menu Language
English
French
Spanish
Set the language for the Disc menu.
Audio Language
Original
English
French
Set the language for audio.
Subtitle Language
OFF
English
French
Set the language for subtitle.
2.Display setting
Pages 70-71
OSD Language
English
Français
Español
Set the language for OSD
(On Screen Display).
Angle Icon
ON
OFF
Set the display or undisplay of multi-
angle icon in a case the DVD in
playback mode contains multi-angle
scene.
Screen Saver OFF
5 minutes
10 minutes
Set the time to work the screen
saver on the screen.
FL Dimmer Auto
Bright
Dark
Set the brightness of the front panel
display.
3.Audio setting
Pages 71-72
Digital Out PCM
48kHz
96kHz
Set whether the sound recorded
in 96kHz will be down sampled in
48kHz.
Dolby Digital
PCM
Stream
Set the type of sound signal which
outputs from the digital audio output
jack.
Dynamic Range
Control
ON
OFF
Compressing the range of sound
volume.
4.Video setting
Page 73
Still Mode
Auto
Field
Frame
Set the type of still image in pausing
playback.
5.Parental setting
Pages 73-74
Parental Lock
(Change password)
All
level 8 to 1
Set the parental level of your DVD
discs.
Enter the current
four-digit password
Set and change the password.
E9A10UD_DVR90VG.indd 68 2005/12/26 18:56:11