User manual

7 Operating
7.1 Starting the device
Connect the device to the power supply to start operation. After a few seconds the unit is
ready for use.
7.2 Remote control
The device can only be remote controlled if it's neither working in a Master / Slave congura‐
tion nor DMX-controlled.
Use [ON/OFF] to blackout the unit or cancel the blackout.
Press [AUTO]. The unit now operates in automatic stand-alone mode.
In the Auto mode, you can enable a strobe eect. Press [STROBE] and use [+] and [–] to select a
value between ‘FS00’ (slow) and ‘FS99’ (fast). Press again [STROBE] to turn the strobe eect o.
In the Auto mode, you can adjust the running speed. Press [SPEED] and use [+] and [–] to select
a value between ‘SP01’ (slow) and ‘SPFL’ (fast).
Blackout
Auto mode
Operating
26
SePar QUAD LED RGB UV IR, SePar QUAD LED RGBW IR
LED PAR