User manual

4. Use [Up] and [Down] to change the respectively indicated value. Changed values and
settings will immediately take eect.
5. With [Mode] you return to the previous menu level.
If you do not press any key for about 15 seconds, the display will turn o. The set values are
retained even when the device is disconnected from the mains power supply.
Press [Mode] repeatedly until the display shows ‘AUTO’ .
ð
The unit now operates in automatic stand-alone mode.
Automatic operation can only be activated when the unit is operating in stand alone mode or
as master in a master / slave combination. This setting is only relevant if the device is not con‐
trolled via DMX.
Auto mode
Operating
30
SePar Hex LED RGBAW UV IR
LED PAR