User manual

Use the coloured buttons to select a colour tone in any mode. The following assignment
applies:
Button Colour Button Colour Button Colour
0 Cyan 5 Magenta R Red
1 Purple 6 Light green G Green
2 Pink 7 Bright blue B Blue
3 Yellow 8 Brown A Amber
4 White 9 Warm white W White
To reset the device to factory default settings, press [ON/OFF] to blackout the unit and then
simultaneously [9], [8] and [7].
7.3 Operating controls on the device
1. Press [Mode] to activate the main menu.
2. Press again [Mode] to call up further menu items.
3. To activate the respectively shown menu item, press [Setup].
Colour selection
Reset to factory defaults
Operating
SePar Hex LED RGBAW UV IR
29
LED PAR