User manual

1. Press [PRG]. Use [+] and [–] to select a value between ‘Pr.01’ and ‘Pr.16’ .
2. Press [STROBE] and then use [+] and [–] to select a value between ‘FS.00’ (slow) and
‘FS.99’ (fast). Press [STROBE] again to disable the Strobe eect.
3. Press [SPEED] and then use [+] and [–] to select a value between ‘SP.01’ (slow) and
‘SP.FL’ (fast) to set the running speed of the programmes.
1. Press [SOUND]. This activates a sound controlled automatic show.
2. Use [+] and [–] to adjust the sensitivity for the sound control in a range from ‘SU.00’ to
‘SU.31’ .
1. Press [Dimming] to adjust the brightness of the primary colours.
2. Press [R] (red), [G] (green): [B] (blue), [A] (amber), [W] (white) or [1] (UV) and then use [+]
and [–] to select a value between 0 and 255.
Programme mode
Sound control
Dimming
Operating
28
SePar Hex LED RGBAW UV IR
LED PAR