User manual

1 [LINK]
Balanced parallel signal outputs, designed as XLR chassis plugs.
2 [INPUT]
Balanced line signal inputs, designed as XLR chassis sockets.
3 [Hz]
Crossover frequency control: Control to adjust the crossover frequency (40-250 Hz) of the low pass filter.
4 [HIGH PASS OUT]
Balanced line signal outputs for signals above the crossover frequency, designed as XLR chassis plug.
5 [SIG/LIMIT]
Limit LED (blue): Indicates overload. In this case, the level of the line input signal is too high.
6 LED
Power LED: Indicates that operating voltage is present.
7 [SUB LEVEL]
Volume control.
Connections and controls
active subwoofer
16