User manual

If necessary, press [DOWN] repeatedly and conrm with [ENTER] to call up the menu item
‘Record Scene’ . Here you can assign the scene currently performed by the device to one of 8
memory locations for the scenes ‘Red’ , ‘Green’ , ‘Blue’ , ‘White’ , ‘Yellow’ , ‘Cyan’ , ‘Purple’ and
‘AllWhite’ .
Press [ENTER] and use [UP] and [DOWN] to select the desired memory location. Press [ENTER]
and use [UP] and [DOWN] to select ‘Yes’ . Conrm with [ENTER] to save the scene. This will over‐
write the previously saved parameters for this scene.
Press [MODE] repeatedly until the display shows ‘Record Scene’ again.
Recording scenes
Operating
44
PicoWash 40Z Pixel Quad
Moving Head