User manual

If necessary, press [DOWN] repeatedly and conrm with [ENTER] to call up the menu item

‘Motor Set’ . This function allows you to specify whether the LEDs light up in DMX mode during

the movements of the device head or during zooming, or not.

The display shows ‘Motor Set’ . Press [ENTER ] to select the function ‘Move Blackout’ and con‐

rm with [ENTER]. Then use [UP] or [DOWN] to select ‘ON’ and press [ENTER] to enable this

function (LEDs ‘o’ on DMX-controlled movement). Select ‘OFF’ and press [ENTER] to disable

this function (LEDs ‘on’ on DMX-controlled movement).

Press [MODE] repeatedly until the display shows ‘Motor Set’ again.

If necessary, press [DOWN] repeatedly and conrm with [ENTER] to call up the menu item

‘Motor Set’ . This function allows you to invert the Pan and Tilt movement.

The display shows ‘Motor Set’ . Conrm with [ENTER]. Press [UP] or [DOWN] until the display

shows ‘Motor Calibrate’ . Conrm with [ENTER]; now you can use [UP] and [DOWN] to select

between ‘Pan Motor’ and ‘Tilt Motor’ . Press [ENTER] the respective option and then press [UP]

and [DOWN] until the display shows ‘Reverse’ . Conrm with [ENTER]. Use [UP] and [DOWN] to

select ‘Yes’ to invert the movement or ‘No’ in order not to invert. Conrm with [ENTER].

Motor Set

Inverting Pan / Tilt

Operating

PicoWash 40Z Pixel Quad

Moving Head