User manual

Display Description Value range
Blue4 Intensity ‘Blue’ LED top right 0 (o) – 255 (max.)
White4 Intensity ‘White’ LED top right 0 (o) – 255 (max.)
Any ‘Strobe’ setting except ‘0’ overrides settings ‘Strobe1–4’ for individual LEDs.
If you have left the menu and ‘Red Alone’ is displayed again, press [DOWN] to consecutively
select the scenes ‘Green Alone’, ‘Blue Alone’, ‘White Alone’, ‘Yellow Alone’, ‘Cyan Alone’, ‘Purple
Alone’, ‘Red Alone’ and ‘AllWhite Alone’ which you can change as described.
7.2.3 Programme menu
Press repeatedly [DOWN ] while ‘Addr:XXX NoSignal’
is ashing in the display to select one of
the 9 preprogrammed shows ‘Prog 1’ to ‘Prog 9’ . Press [ENTER] twice to open the Programme
menu and to change show parameters as desired.
Operating
36
PicoWash 40Z Pixel Quad
Moving Head